by v8astregt » Fri Jul 14, 2006 11:17 pm
I can see two differences between the two.
First off, with the Ron Davis, there is a taper at the bottom which means I have to do less cutting to the K-members.
And second, the radiator hose location for the bottom is set higher than the BeCool... and I know on mine, that allows me to run my front sway bar. If the hose were any lower, I don't think I could make a sway bar work.
75 Pontiac Astre GT: 406SBC/TH350, roll bar, S10 goodies, down to 11.47 so far, more to come later.