Page 1 of 1

72 vega door pin bushings

PostPosted: Wed Mar 07, 2012 5:40 pm
by duke72gt
New to the sit,just started working on a 72 and was talking to a friend about replaceing the door pins on mine and he said that he got some from a guy and they were for a 69 camaro and they would work does any one eles know about this thanks.

Re: 72 vega door pin bushings

PostPosted: Wed Mar 07, 2012 6:47 pm
by hammerdown7
Pins are normally re-usable, it's the bushings they slide through that wear and break. Ooops, I see your title said bushings, Clyde can probably help you with the correct ones.

Dick

Re: 72 vega door pin bushings

PostPosted: Wed Mar 07, 2012 8:09 pm
by duke72gt
Hey thanks dick,no i was talking about both but i'm not to good at this stuff (typing),I was just thinking about putting new ones in for another 40 years.

Re: 72 vega door pin bushings

PostPosted: Thu Mar 08, 2012 12:01 am
by cjbiagi
I have a few new pins and bushings left. I never heard of Camaro ones fitting and they are different part numbers. cjbiagi@yahoo.com

Re: 72 vega door pin bushings

PostPosted: Thu Mar 08, 2012 4:25 pm
by 122Vega
I bought a set from the dealership about eighteen months ago. AFAIK they are still a current part number. It wa about eighteen for bushins and forty for pins.

Re: 72 vega door pin bushings

PostPosted: Fri Mar 16, 2012 2:57 pm
by HR1140
I just took the measurements from the origionals and picked the ones that matched from McMaster-Carr. Worked great and was cheap.

Re: 73 vega door pin bushings

PostPosted: Wed Dec 06, 2023 3:39 pm
by als73vega
I,m replacing my passenger door on a 73 vega wagon.I like to buy pin and bushing kit.Do you have any left?Thanks

Re: 72 vega door pin bushings

PostPosted: Thu Dec 14, 2023 8:51 pm
by cjbiagi
Al, they are on the way.............Thanks