The Official H-Body Internet Community

by **dindin** » Mon Sep 08, 2014 9:33 am

Anyone have any experience with Mopar Combustion Chamber Cleaner for cleaning off piston carbon? I have read some good things about it and was thinking about using it..Looking for the Good, the bad and the ugly about it if possible..

Al

by **marco_1978_spyder** » Mon Sep 08, 2014 8:48 pm

I haven't used that, but I have heard you can use tiny amounts of water.. Or transmission fluid (very smokey) or marvels mystery oil - again pretty smokey.

Just ad to the engine while running and rev to avoid stalling

by **rpoz-29** » Mon Sep 08, 2014 10:52 pm

GM makes a similar product called "Top Engine Cleaner". I have seen, (as Marco mentioned), a guy use a spray bottle of water and mist it into the carburetor throat. He says it worked well.

by **dindin** » Tue Sep 09, 2014 9:25 am

cos2.jpg

Actually its to clean the engine while its apart..this is a picture of the piston crud..

by **rpoz-29** » Tue Sep 09, 2014 5:27 pm

With the head off, I would scrape it off. Then use carb and choke cleaner to finish cleaning it.

by **dindin** » Thu Sep 11, 2014 10:05 am

That stuff is really baked on scraper was useless..gonna try the mopar clean and post my findings.

Al

The Official H-Body Internet Community

Mopar cleaner..

Mopar cleaner..

Re: Mopar cleaner..

Re: Mopar cleaner..

Re: Mopar cleaner..

Re: Mopar cleaner..

Re: Mopar cleaner..

Who is online