Page 1 of 1
checking bump steer pictures
Posted:
Thu Nov 20, 2014 11:16 am
by 79440bird
IMG_20130430_220923.jpg
IMG_20130430_220911.jpg
IMG_20130413_204600.jpg
IMG_20130413_204550.jpg
IMG_20130513_132348.jpg
Well here is some pictures I feel will work to help you fix your bump steer. I tried a Mustang rack an pinion an could not get rid of the bump steer. No matter whe re I mounted the rack an pinion. So back to the junkyard got a chevy chevette rack an pinion. This rack seems to work as the inner tie rods measure up close to the same as the lower control arm bolts. I just don't like the mounting set up on the chevette rack so I'm thinking about spending the dollars and have a custom rack an pinion made for these h body's cars. Also I'm using gen1 camaro spindles with 67 gto steering arms but may make my own steering arms so I can move the rack an pinion to my liking.(made template one out of wood for mock up purpose only) I'm using factory stock outer tie - rods from a 94 camaro with the chevette rack an pinion. I don't believe a racing heim joints should be used on the street. Walmart or k - mart cheap laser pointer. Clamp to the rotor. Mark about 10 lines on a board about 1/4 apart from each other. With no coil spring in the car, move the spindle assembly up an down in the ride height you choose. Watch the laser dots. If it's good they both will move to the next few lines the same. If you have bump steer one laser dot will move to the next line while the other will move two or three lines. All in all. They need to move to the next new line the same or very close to the same. I have heard that you will never get the car to have zero bump steer (not sure how true that is) This I believe will work an I will be putting it to the test in the next year. If You think this don't work please explain thanks Doug
Re: checking bump steer pictures
Posted:
Fri Nov 21, 2014 7:19 pm
by anorexicvega
whats wrong with the mounting set-up on a chevette rack?
Re: checking bump steer pictures
Posted:
Sat Nov 22, 2014 12:55 am
by 79440bird
Wish they where stiffer energy suspension don't make any polyurethane mounts for the chevette rack an pinion sad
Re: checking bump steer pictures
Posted:
Mon Oct 19, 2015 6:52 pm
by anorexicvega
energy suspension doesnt, but they are available.
Re: checking bump steer pictures
Posted:
Tue Oct 20, 2015 9:31 am
by waybad
well done!
Re: checking bump steer pictures
Posted:
Tue Feb 28, 2017 10:23 pm
by 79440bird
Where do you get the polyurethane rack an pinion bushing for the chevy chevette rack??
Re: checking bump steer pictures
Posted:
Wed Mar 01, 2017 2:36 pm
by monzaaddict
Re: checking bump steer pictures
Posted:
Mon Mar 06, 2017 9:39 pm
by Bullet
I'd suggest ordering a race catalog from Speedway Motors. They have new metric style GM spindles that use bolt on steering arms and they have different length arms as well. The suspension and steering components available for asphalt and dirt cars are almost endless and I am convinced the perfect steering combination can be assembled, it will probably take some trial and error but that's generally accepted practice with an H-body. It would also be important to note that some race parts are just that and wouldn't stand up to daily grind drving.
Re: checking bump steer pictures
Posted:
Tue Mar 07, 2017 12:09 am
by monzaaddict
just my opinion, but to get the inner tie rods anywhere near where they are on the stock centerlink would require something like this