Moderator: Moderators
TimMcCabe wrote:The drivers side would not go into place due to the fact that there is not enough clearance between the frame and the block for the collector to fit through.
The passenger side is even worse, the tube for cyl 4 is hard against the inner fender, the engine would have to move left at least 1 inch or up about 2 inches just to get it even close .
The real pisser is that if they would have just angled the header flange a few degrees, the thing would have just dropped into place.
Cheers, Tim
Users browsing this forum: No registered users and 19 guests