NEW VERSION Rearend Swap Brackets

Anything H-body related, but please use one of the topic-specific forums below if appropriate

Moderator: Moderators

NEW VERSION Rearend Swap Brackets

Postby Monzamouse » Tue Feb 14, 2017 12:04 am

I have designed a new upper control arm bracket that
is adjustable for 3 positions. It has the stock position
plus a 2 inch above stock position and a 3 inch above
stock position. The bolt holes are drilled for stock 7/16
bolts so you can use your stock control arms.
These points were picked because of
information in an article that Smiley sent me a while
back for wheel hop. I can’t guarantee this will work
but the article suggests it will due to instant center change.
So it will be Smiley’s fault if it doesn’t work LOL.
I have posted in the for sale section for pricing and few
more pictures.

Thanks
Larry Ray
Attachments
DSCN1427A.JPG
DSCN1427A.JPG (111.46 KiB) Viewed 222 times
User avatar
Monzamouse
 
Posts: 59
Joined: Fri Jun 30, 2006 12:54 pm
Location: Houston, Texas area

1976 Chevrolet Monza 2+2


Re: NEW VERSION Rearend Swap Brackets

Postby Smiley » Tue Feb 14, 2017 1:06 am

:th: awesome job !
User avatar
Smiley
 
Posts: 670
Joined: Tue Jul 17, 2012 2:50 am

Re: NEW VERSION Rearend Swap Brackets

Postby Green Weenie » Tue Feb 14, 2017 9:50 am

Would you happen to know what the width is from axle face to axle face on monza rearend. Axle face where the rim bolts up. Don't know what else to call it. Thanks.
Green Weenie
 
Posts: 7
Joined: Fri Dec 02, 2016 7:04 am

Re: NEW VERSION Rearend Swap Brackets

Postby Monzamouse » Tue Feb 14, 2017 4:42 pm

Does this help.
Attachments
monzarear[1].jpg
monzarear[1].jpg (27.04 KiB) Viewed 190 times
User avatar
Monzamouse
 
Posts: 59
Joined: Fri Jun 30, 2006 12:54 pm
Location: Houston, Texas area

1976 Chevrolet Monza 2+2

Re: NEW VERSION Rearend Swap Brackets

Postby Green Weenie » Tue Feb 14, 2017 4:56 pm

Perfect, Thanks.
Green Weenie
 
Posts: 7
Joined: Fri Dec 02, 2016 7:04 am


Return to General Discussion

Who is online

Users browsing this forum: Bing [Bot] and 1 guest