Page 1 of 1
NEW VERSION Rearend Swap Brackets
Posted:
Tue Feb 14, 2017 12:04 am
by Monzamouse
I have designed a new upper control arm bracket that
is adjustable for 3 positions. It has the stock position
plus a 2 inch above stock position and a 3 inch above
stock position. The bolt holes are drilled for stock 7/16
bolts so you can use your stock control arms.
These points were picked because of
information in an article that Smiley sent me a while
back for wheel hop. I can’t guarantee this will work
but the article suggests it will due to instant center change.
So it will be Smiley’s fault if it doesn’t work LOL.
I have posted in the for sale section for pricing and few
more pictures.
Thanks
Larry Ray
Re: NEW VERSION Rearend Swap Brackets
Posted:
Tue Feb 14, 2017 1:06 am
by Smiley
awesome job !
Re: NEW VERSION Rearend Swap Brackets
Posted:
Tue Feb 14, 2017 9:50 am
by Green Weenie
Would you happen to know what the width is from axle face to axle face on monza rearend. Axle face where the rim bolts up. Don't know what else to call it. Thanks.
Re: NEW VERSION Rearend Swap Brackets
Posted:
Tue Feb 14, 2017 4:42 pm
by Monzamouse
Does this help.
Re: NEW VERSION Rearend Swap Brackets
Posted:
Tue Feb 14, 2017 4:56 pm
by Green Weenie
Perfect, Thanks.
Re: NEW VERSION Rearend Swap Brackets
Posted:
Mon Mar 26, 2018 7:19 am
by Drpepper454
How much is the rear end bracket kit and how do you order it
Re: NEW VERSION Rearend Swap Brackets
Posted:
Mon Mar 26, 2018 9:58 am
by Monzamouse
PM sent.
Re: NEW VERSION Rearend Swap Brackets
Posted:
Mon Mar 26, 2018 2:32 pm
by LSnotchback
Awesome, just what I have been looking for
Re: NEW VERSION Rearend Swap Brackets
Posted:
Tue Mar 27, 2018 1:21 am
by T-FATTY
Send pm with ordering info on complete bracket kit. What size axle tube options?
Re: NEW VERSION Rearend Swap Brackets
Posted:
Mon Feb 18, 2019 10:24 pm
by 1971vega
Hi Monzamouse I would like to order a set of you new version brackets to help with my install of a 8.5 rear end I sent a pm thanks
Re: NEW VERSION Rearend Swap Brackets
Posted:
Wed Feb 20, 2019 7:01 am
by Smiley
You will get a faster response if you email him
Re: NEW VERSION Rearend Swap Brackets
Posted:
Sat Feb 03, 2024 1:52 am
by Valdi
Greetings; I saw your brackets shown on YouTube on Burnouts and Rotorblades. A Vega was being built and he advised to get the brackets from you, in order to do a rearend swap. I saw them here on your forum, but I can't figure out how to get them./ Can you assist me. How do I get to you sales page. This is my first time on the H-Body forum.
Re: NEW VERSION Rearend Swap Brackets
Posted:
Sat Feb 03, 2024 12:08 pm
by Monzamouse
Hello Valdi I sent you a PM.
Thanks
Larry 346-208-2088
Re: NEW VERSION Rearend Swap Brackets
Posted:
Sat Feb 10, 2024 6:52 pm
by First vega
I would like to purchase a set of brackets how can I reach monza mouse for them
Re: NEW VERSION Rearend Swap Brackets
Posted:
Sun Feb 11, 2024 10:47 am
by Monzamouse
I got your PM