Door hinge pins

Anything H-body related, but please use one of the topic-specific forums below if appropriate

Moderator: Moderators

Door hinge pins

Postby Brian Driscoll » Mon Apr 16, 2018 12:02 pm

Hello I am looking for a pair of door hinge pins for my 1980 Monza Coupe. Dorman makes bushings, but pins are unavailble. Misplaced my pins. Any help would be greatly appreciated. Brian Driscoll
Brian Driscoll
 
Posts: 7
Joined: Wed Apr 11, 2018 10:00 pm


Re: Door hinge pins

Postby hammerdown7 » Mon Apr 16, 2018 12:09 pm

Contact Clyde Biagi, cjbiagi@yahoo.com

If anyone can find them for you Clyde can.

Dick
User avatar
hammerdown7
 
Posts: 3805
Joined: Mon Jun 26, 2006 7:53 pm
Location: Clawson, MI

1976 Chevrolet Vega Cosworth

Re: Door hinge pins

Postby Brian Driscoll » Mon Apr 16, 2018 5:23 pm

Dick, Thanks for the heads up. I did try his email last week and again just now. Both times they failed. I am not sure if I am doing something wrong or that email address is no longer active. My email is : pipercub92650@gmail .com if anyone can contact him. Thanks again...... Brian Driscoll
Brian Driscoll
 
Posts: 7
Joined: Wed Apr 11, 2018 10:00 pm

Re: Door hinge pins

Postby cjbiagi » Mon Apr 16, 2018 6:20 pm

I do not have any more hinge pins and for the most part they have dried up in NOS land. There is a possibility I can find one or 2 but the prices may be quite a bit higher than I was able to sell them that before. My email is cjbiagi@yahoo.com
Clyde.........75 Monza 2+2
User avatar
cjbiagi
 
Posts: 8608
Joined: Sun Jun 25, 2006 2:37 pm
Location: Glenwood, Illinois

1975 Chevrolet Monza

Re: Door hinge pins

Postby marz » Mon Apr 16, 2018 9:06 pm

Anyone remember the part number? It was a few years back, but a GM dealership up north had three sets in stock, I could check?
User avatar
marz
 
Posts: 228
Joined: Tue Jun 27, 2006 11:40 am
Location: Toronto, Ontario

1980 Chevrolet Monza Spyder

Re: Door hinge pins

Postby Brian Driscoll » Mon Apr 16, 2018 10:44 pm

Thank you one and all for the replies to my door pin search. My local GM dealership still has the pin and bushing part numbers in their computer system. but no parts. According to them the pins are GM part #9655646 and the bushings available from Dorman are GM part #9822198. ( Dorman #38391 ). Thanks again ! Brian
Brian Driscoll
 
Posts: 7
Joined: Wed Apr 11, 2018 10:00 pm

Re: Door hinge pins

Postby monzaaddict » Tue Apr 17, 2018 6:36 am

monzaaddict
 
Posts: 2599
Joined: Sun Jul 02, 2006 3:04 pm

Re: Door hinge pins

Postby marz » Tue Apr 17, 2018 11:01 am

Thanks for the part numbers-- I called them in Hanover, whatever stock they had is gone. Sorry!
User avatar
marz
 
Posts: 228
Joined: Tue Jun 27, 2006 11:40 am
Location: Toronto, Ontario

1980 Chevrolet Monza Spyder

Re: Door hinge pins

Postby Brian Driscoll » Tue Apr 17, 2018 12:58 pm

Hello Everyone! Thanks again for your response and for checking around for me . Monzaddict added a website in Montana called Oldsmobile Obsolete. Called them and they have NOS pins and bushings in stock. Owners Katherine and Gary were very helpful and accomodating. Thanks again for all the help. My next post is going to ask all you guys about engine recommendations. 151 Iron Duke made it to109,000 miles. Removed from the car. Car is an automatic. Maybe something better than rebuilding the Iron Duke ? V6 or ?
Brian Driscoll
 
Posts: 7
Joined: Wed Apr 11, 2018 10:00 pm

Re: Door hinge pins

Postby cjbiagi » Tue Apr 17, 2018 4:24 pm

I am getting a few NOS door pins. If anyone else needs any let me know.........
Clyde.........75 Monza 2+2
User avatar
cjbiagi
 
Posts: 8608
Joined: Sun Jun 25, 2006 2:37 pm
Location: Glenwood, Illinois

1975 Chevrolet Monza

Re: Door hinge pins

Postby Brian Driscoll » Fri Apr 20, 2018 12:31 pm

Hello Clyde, Saw your post about NOS hinge pins for my 1980 Chevy Monza. I believe the part number is 9655646.I should have kept my mouth shut. After mentioning "Oldsmobile Obsolete" on this website and the fact that they had the pins and bushing I needed, someone from Indiana called them and took all of their pins and some bushings. So by the time I called them the next morning, the pins were sold out. What a coincidence....... So I am back to square one on the pins. My phone number is 563-212-8060. Email: pipercub92650@gmail.com Thanks. Brian. Driscoll
Brian Driscoll
 
Posts: 7
Joined: Wed Apr 11, 2018 10:00 pm

Re: Door hinge pins

Postby cjbiagi » Fri Apr 20, 2018 1:29 pm

Email sent.....I located some NOS pins, I was not the guy who ordered them from your previously mentioned supplier.
Clyde.........75 Monza 2+2
User avatar
cjbiagi
 
Posts: 8608
Joined: Sun Jun 25, 2006 2:37 pm
Location: Glenwood, Illinois

1975 Chevrolet Monza

Re: Door hinge pins

Postby HenryJ » Thu Apr 26, 2018 10:04 pm

Anyone got NOS pins and bushings for a 1971 Chevrolet Vega doors?

Also...any repair solutions for the door check rollers? Mine are worn/broken:

Image
"Speed doesn't kill, suddenly becoming stationary does." - Richard Hammond
"Speed is just a matter of Money - How fast do YOU want to go?"-Mechanic from Mad Max-
If at first you don't succeed - Don't take up Skydiving!
User avatar
HenryJ
 
Posts: 63
Joined: Fri Aug 28, 2015 8:52 pm

Re: Door hinge pins

Postby cjbiagi » Fri Apr 27, 2018 9:44 am

Ouch......obviously the result of no lubrcation for many years. Bushings are not a problem, I have them if needed (as well as pins). As far as the roller, that was part of the hinge and not spared separately. Problem is the hinges are welded to the chassis and door. If you can find a used hinge you may be able to figure out a way to replace the roller.
Clyde.........75 Monza 2+2
User avatar
cjbiagi
 
Posts: 8608
Joined: Sun Jun 25, 2006 2:37 pm
Location: Glenwood, Illinois

1975 Chevrolet Monza

Re: Door hinge pins

Postby Monza Harry » Fri Apr 27, 2018 5:59 pm

I would just drill/grind the pin heads off and commence a beatin'! Take your time and watch where the drill/grinder is going, you don't want to damage the hinge. After it is out take some measurements [or find a machinist friend to help, your going to need him/her for stage two for sure]. Now find/make a new pin I would think a Gr. 8 Bolt would do nicely adjust the head to fit the space [I remember that going inside the other hinge] maybe remove the extra stock and tack weld it in. If you have any mould shops around, a cut off piece of "ejector sleeve" would be an excellent choice [and free if you are lucky]. I f luck isn't running your way right then just make the piece with the help of said machinist friend [of course you may already have said skills that would be a big win!] Some adjusting of the plan will likely be in order as you open up the "patient"! Good Luck and share your journey with us win or lose, we will all learn something either way, and we may still be able to Help out. Harry
I'm not a hoarder I'm a preservationist 78 Monza Spyder (~Soon(ish +/- I guess) To Be 2+2 with Spoilers)
User avatar
Monza Harry
 
Posts: 2568
Joined: Tue Oct 04, 2011 8:50 am
Location: Windsor ON Canada

1978 Chevrolet Monza 2+2

Next

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 7 guests