Please Help ! S-10 Spindel (Rabbit Hole) Questions

Anything H-body related, but please use one of the topic-specific forums below if appropriate

Moderator: Moderators

Please Help ! S-10 Spindel (Rabbit Hole) Questions

Postby 1973383Stroker » Sun Sep 09, 2018 2:15 am

I’m currently in the process of installing Vega a-arms with S-10 spindles. I’ve installed all new bushings and need to purchase both upper and lower ball joints. Can anyone please direct me to the correct ball joints to order? Any feedback will be greatly appreciated !
1973 Notchback 383 Stroker Motor
1973383Stroker
 
Posts: 3
Joined: Sun Apr 12, 2015 11:51 am


Re: Please Help ! S-10 Spindel (Rabbit Hole) Questions

Postby hammerdown7 » Sun Sep 09, 2018 7:42 am

The easiest way is to use later '75 and newer upper and lower ball joints and purchase from V8 Monza's website his ball joint adaptors. Here's his instructions, http://www.v8monza.com/faq-fsus-S10_front-walk-thru.htm

Dick
User avatar
hammerdown7
 
Posts: 3540
Joined: Mon Jun 26, 2006 7:53 pm
Location: Clawson, MI

1976 Chevrolet Vega Cosworth

Re: Please Help ! S-10 Spindel (Rabbit Hole) Questions

Postby avewhtboy » Mon Sep 10, 2018 4:01 pm

1973383Stroker wrote:I’m currently in the process of installing Vega a-arms with S-10 spindles. I’ve installed all new bushings and need to purchase both upper and lower ball joints. Can anyone please direct me to the correct ball joints to order? Any feedback will be greatly appreciated !
1973 Notchback 383 Stroker Motor



if you are switching to S10 ball joints, which is recommended, you just purchase S10 Ball joints and the sleeves to weld in your control arms
User avatar
avewhtboy
 
Posts: 571
Joined: Thu Sep 24, 2009 11:06 am
Location: Stone Mountain Georgia


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 2 guests