The Official H-Body Internet Community

I’m currently in the process of installing Vega a-arms with S-10 spindles. I’ve installed all new bushings and need to purchase both upper and lower ball joints. Can anyone please direct me to the correct ball joints to order? Any feedback will be greatly appreciated !
1973 Notchback 383 Stroker Motor

The easiest way is to use later '75 and newer upper and lower ball joints and purchase from V8 Monza's website his ball joint adaptors. Here's his instructions, http://www.v8monza.com/faq-fsus-S10_front-walk-thru.htm

Dick

1973383Stroker wrote:I’m currently in the process of installing Vega a-arms with S-10 spindles. I’ve installed all new bushings and need to purchase both upper and lower ball joints. Can anyone please direct me to the correct ball joints to order? Any feedback will be greatly appreciated !
1973 Notchback 383 Stroker Motor

if you are switching to S10 ball joints, which is recommended, you just purchase S10 Ball joints and the sleeves to weld in your control arms