Ball Joint Sleeves

Moderator: Moderators

Ball Joint Sleeves

Postby Vega75randy » Sun Oct 29, 2006 6:56 pm

Does anyone have pictures of them installing the UB Machine ball joint sleeves? This would be a great addition to this forum just like DirtMods adapting of S-10 ball joint ends. Since it is easier to get the sleeves a few pictures of the installation would help any of us who would like to do the same.

Colin: Do you still have the tapered reamer for reaming out the stock vented disc spindles to S-10 ball joint size?

Lets keep the ideas flowing!
Randy S. Hager
Vega75randy
 
Posts: 105
Joined: Wed Jul 26, 2006 10:57 pm
Location: Venus, TX


Postby bill1978v8 » Tue Oct 31, 2006 9:08 pm

I used the ball joint sleeves on a set of lower control arms but I sold them to CW383. They were welded in and excepted the S10 ball joints. They worked very well but I wanted a sway bar so I swapped them out. Does anyone have ball joint measurements (what taper?) This should be a standard tapered reamer size.

Bill
1975 Monza 2+2, 4.3L V8, Auto
User avatar
bill1978v8
 
Posts: 1657
Joined: Sun Jun 25, 2006 2:44 pm
Location: Ambridge PA

1978 Chevrolet Monza 2+2


Return to Suspension, Steering, & Brakes Tech

Who is online

Users browsing this forum: No registered users and 5 guests

cron