help need to order front and rear springs today

Moderator: Moderators

help need to order front and rear springs today

Postby rickhunter1max » Tue Mar 13, 2007 4:04 pm

Is this a good spring set up for the street 71 vega V8 with monza A-arms

FRONT:

Part Number: CS6490

Our Price: $64.99

INSIDE DIA.= 3.5 in.; BAR DIA.= 0.59 in.; FREE HEIGHT= 13.63 in.; SPRING RATE= 318 Lbs./In.; LOAD= 1465 Lbs.; LOAD HEIGHT= 9 in.; END 1= SQUARE; END 2= TANGENTIAL

REAR:

Part Number: CS5659

Our Price: $81.99


INSIDE DIA.= 4.3 in.; BAR DIA.= 0.5 in.; FREE HEIGHT= 13.55 in.; SPRING RATE= 162 Lbs./In.; LOAD= 576 Lbs.; LOAD HEIGHT= 10 in.; END 1= PIG TAIL; END 2= SQUARE
User avatar
rickhunter1max
 
Posts: 170
Joined: Wed Jul 26, 2006 5:33 pm
Location: los angeles,ca

1971 Chevrolet Vega GT


Postby heinz057 » Tue Mar 13, 2007 4:37 pm

the 6490 are made for the deep pocket control arms. your 71 stock has shallow control arms . the 6490 will work if you shorten them, or find a set of deep pocket arms. for the rear you can use cc635 springs(about $60 from advance), they will lift the rear about 2".they are a progressive spring for a 89 camaro. i have them in my wagon with a 235/60/ 15 tire on a 15x7 wheel and they fit in the wheel well with no rubbing
heinz057
 
Posts: 825
Joined: Sun Jun 25, 2006 4:24 pm
Location: nj

1978 Chevrolet Monza Wagon

Postby 73Sedan » Tue Mar 13, 2007 6:23 pm

are you referring to this post?

http://forums.h-body.org/viewtopic.php?t=19167

Heinz: yes the 6490 is taller, but it's lower rate works in the shallow pocket a-arm setup, also allowing proper lower suspension travel.

As for the rear - I've already got the 5659s in and they raise the rear about 1.25" to 1.75" (forgot to measure the original setup).

In the profile photo the rear had not settled (weight is based on the body and glass only). Since I loaded the car up for storage, it sits PERFECT in the rear. Sorry, I haven't set up the front yet.
Attachments
Vega_5414.jpg
Sheet metal and glass weight
Vega_5414.jpg (57.47 KiB) Viewed 435 times
Vega_5415.jpg
225-55/16 on 16x7 BMW wheels (to roll it)
Vega_5415.jpg (72.6 KiB) Viewed 435 times
User avatar
73Sedan
 
Posts: 268
Joined: Thu Jun 29, 2006 10:31 am
Location: Tampa, Florida


Return to Suspension, Steering, & Brakes Tech

Who is online

Users browsing this forum: No registered users and 2 guests