Crap, what an ordeal trying to put on my Spohn tubular rear control arms. I would think this would be easy, I worked on it all day and didnt finish.
I drilled the upper arms mount holes to 1/2 no problem. Unbolted the rear shock mount and was able to lower the rear enough to get the drill in the top mount. Installed one upper no problem, tried the second and it will not line up. I was wrestling the rear so much to get it to line up I pulled the driveshaft out of the trans, oh crap. I can't move the rear enough by myself to get it back in. So, now thinking maybe its better to install lowers first. I disconected the one upper I had bolted in at the diff. So, I'll get the lowers on since they are not adjustable and will position the rear better, hopefully the upper will then go on easier, I sure hope one of my mounts is not twisted.
Even getting the old bolts out of the front of the lower arms was a pain, I had to drop my exhaust to get the mufflers out of the way so I could drive out the bolt with a hammer.
I'm I going about this all wrong? I probably should do the lower arms first?