Page 13 of 16

Re: The official Tire and rim Thread!

PostPosted: Mon Sep 23, 2013 8:37 am
by WindsorShatzkin
Thanks Dick!

Bassett makes the wheels I'm looking at in a 4" backspace, so I may just go with those since they will be an easier fitment, according to your example.

I may just buy one of each, and see how they fit. If it's not a crazy amount of custom work, I may try to get the originally proposed 3" backspace wheels to fit. Since I'm doing sheet metal work now, it'll be easier to deal with. I had planned on rolling the fenders anyway, so maybe I can work in a 1/2" or so flare into them, and I can get them to clear. I'm looking to get a similar stance as your & 122Vega's avatar pics. Maybe a little lower if I can flare the fenders correctly.

Thanks again for the quick reply! I'm glad this community still seems very active.

Re: The official Tire and rim Thread!

PostPosted: Wed Oct 09, 2013 11:36 pm
by saaca
I'm going with factory front and rear 4 lug 13 with cragar s/s wheels and hoping to find a set of cooper cobra rased white letter bigs and littles...if I can find them....btw...this is my new 76 astre ii just got..it has the v8 headers and a bolt in roll bar..I'm setting it up with a 283 low hp engine with 70s heads (for acc bolt holes)with a th350 sweet econorod that should have great milage.

Re: The official Tire and rim Thread!

PostPosted: Thu Oct 10, 2013 1:33 am
by SeniorSavage
ya got yerself a nice little ride bro, but i hate to be the one to tell ya that NOBODY makes raised white lettering 13 inch tires anymore.

read; viewtopic.php?f=5&t=39674

cheers.

Re: The official Tire and rim Thread!

PostPosted: Thu Oct 10, 2013 4:48 pm
by saaca
That's what I was thinking...but I can chase that rainbow...lol....just can't bring myself to do whitewalls on a crome wheel...if I have to ill go black wall as long as there american named

Re: The official Tire and rim Thread!

PostPosted: Thu Oct 10, 2013 6:44 pm
by SeniorSavage
ya, but who wants skinny lil tires? unless they're on the front with big slicks on the back of course ...

i'm still pining for 205/60 13's personally .,. Federal Formoza makes a couple types if you can find'em but they're Blackwalls too.

*sigh*

g'luck brudda.

Re: The official Tire and rim Thread!

PostPosted: Mon Dec 16, 2013 7:15 am
by SeniorSavage
Ok, I don`t know anything about fitting rims to axles so I need to to ask if the following rims would actually fit on my stock 75`Skyhawk which I understand has 13 inch with a 4 x 4.5 bolt pattern yes? (or is it 4 x 4.25 I forget..)?

Are there more issues than just the tire fitting in the wheel well and being able to rotate in all 3 axis etc when putting 14 inch rims with a similar bolt pattern onto 13 inch axles?

Looking at my car there certainly appears to be enough room in the wells to handle a larger diameter tire .. so would these fit?

` Measure 14 x 6 inches with 3 1/2 inch back space. 4 bolt unilug with 4 1/4 & 4 1/2 inch bolt circle. `

Is that an excessive amount of backspace which requires adapters or spacers or anything ?

Thanks, Todd

Re: The official Tire and rim Thread!

PostPosted: Mon Dec 16, 2013 9:18 am
by gerbsinmd
All h-bodys came with a 4x4 bolt pattern. I have 225 60 15s on the back of my Monza with no rubbing issues, and 215 60 14s on the front, the fronts do rub a bit but I am still suffering from old ball joints and a-arm bushings.

Re: The official Tire and rim Thread!

PostPosted: Tue Dec 17, 2013 7:53 am
by SeniorSavage
Thanks for responding, nice Mirage you got there !

Re: The official Tire and rim Thread!

PostPosted: Tue Dec 17, 2013 10:05 am
by gerbsinmd
SeniorSavage wrote:Thanks for responding, nice Mirage you got there !

So I'm safe to get and install 4x4 14's all way round and can even go wider than 6 inch wide on the back ones right? Stock is 6 inch wide?

I'm thinking 225/60R14's in back and either 195 or205/60R14's in front.

Todd


Thanks, the Mirage has been a bunch of work! I have 7 inch S10 wheels on the back of it in the 15 inch size with plenty of clearance.

I would think that 14s on the front in those size should work quite well.

Re: The official Tire and rim Thread!

PostPosted: Thu Mar 27, 2014 6:16 am
by 73 307 GT
Has anyone been able to use 2nd gen Z-28 wheels like these? Specs I've found say they are 15X7 with 4.25" b/s. Probably too much backspacing to work.
Image

Re: The official Tire and rim Thread!

PostPosted: Thu Mar 27, 2014 7:23 am
by spencerforhire
I really like the 70's Z/28 steel 5-spoke wheels and have gathered up 8 of them and I have a plan. I'm thinking about modifying a set to get them to fit on my Vega wagon project. What I want to end up with is a pair of 6" wide ones for the front with around 3.5" to 3.75" BS and a pair of 8" for the rear with 4.5" to 4.75" BS. The simplest way to do this would be to carefully cut on a lathe the welds holding the centers into the hoops and then transfer the centers to another set of donor hoops(6" ones are easy to find, 8" would come from Corvette or GM truck rallys that I have lots of). This would allow the back spacing to be custom tailored to the car. The OEM trim rings for these wheels are only about an inch deep and only show the flat lip, so the rear ones might require a non-stock trim ring to hide the offset.
Another possibility would be to split the hoops on two pairs; each pair in a different places an inch apart, allowing the back halves to be swapped around to make one pair wider than the other when they're welded back together. This method would result in 4 wheels that look the same from the outside, but no doubt require spacers on the rear(or a wider than stock rear end) to take up the extra back space.

Re: The official Tire and rim Thread!

PostPosted: Thu Mar 27, 2014 7:55 am
by cosvega76
73 307 GT wrote:Has anyone been able to use 2nd gen Z-28 wheels like these? Specs I've found say they are 15X7 with 4.25" b/s. Probably too much backspacing to work.
Image


Those would probably work on the front, I currently have 17x7s with a 4.5" backspace. In the past I had some 15x7 Centerlines with a 4.87" backspace and a 7/16" spacer to move them out. The 4.25" will likely rub on the inside on the rear, though, 3.75 - 4" is about the most I would think you can use there, with any decent sized tire.

Chuck

Re: The official Tire and rim Thread!

PostPosted: Thu Mar 27, 2014 9:32 am
by gerbsinmd
I thought Kermit(McCabe???) has a those wheels on it. I was looking at those for a while but the ones I kept finding were stupid expensive.

Re: The official Tire and rim Thread!

PostPosted: Thu Mar 27, 2014 10:22 am
by Kenova
gerbsinmd wrote:I thought Kermit(McCabe???) has a those wheels on it. I was looking at those for a while but the ones I kept finding were stupid expensive.

Yes, Tim has a full set of these wheels on Kermit. For tires he is running 205/60/15 on the front and 215/65/15 on the rear.

Ken

Re: The official Tire and rim Thread!

PostPosted: Thu Mar 27, 2014 3:03 pm
by NVEGAR8D
Hi,
I believe the 2nd gen cameros used 2 different backspacings one for front and other for rear . I think you need to find the correct backspaced rim for our cars
and you're good to go.
nick75vega