Lower Control Arm Bushing Ferrules

Moderator: Moderators

Lower Control Arm Bushing Ferrules

Postby cosvega76 » Tue Apr 06, 2010 11:49 am

Okay, guys, here goes....

I just got done talking with Rare Parts about the ferrules (metal caps) for the lower control arm bushings, front suspension. They tell me they can have some made, but they have to make a minimum of 500 pieces, and even then they would sell for $8.50 apiece. I thought I would get an idea of what you guys thought of this, and get back to them.

Chuck
cosvega76
 
Posts: 2739
Joined: Mon Jul 03, 2006 8:36 am
Location: Moscow Mills, MO

1973 Chevrolet Vega GT


Re: Lower Control Arm Bushing Ferrules

Postby gerbsinmd » Tue Apr 06, 2010 12:00 pm

8 needed per car

$70 doesn't seem too much to ask, to be able to rebuild the Front end with stock parts and keep the car safe to drive.

That will then give me the opportunity to save up for the REALLY big upgrade to S10 components with different A-arms and bigger and better brakes.
Last edited by gerbsinmd on Tue Apr 06, 2010 1:55 pm, edited 2 times in total.
1999 Saturn SL2
2017 Cruze Hatchback
2008 Town & Country - Family transport
2018 Cruze - 35mpg - avg, 49.7mpg - best so far.
2011 Impala - commuter
RIP-2002 Saturn SL2 Commuter car - burned a valve @ 234k miles

1977 Monza Mirage being Restified!!
User avatar
gerbsinmd
 
Posts: 2062
Joined: Mon Jun 26, 2006 2:48 pm
Location: Dunkirk, MD

1977 Chevrolet Monza Mirage

Re: Lower Control Arm Bushing Ferrules

Postby 72 SS PNL » Tue Apr 06, 2010 12:39 pm

its 8 per car , 2 on each of the 4 bushings
first and best car owned 72 GT(changed to SS) panel wagon

pictures of the car from 86 - http://www.myrideisme.com/Garage/06_IBM_GOAT/955
User avatar
72 SS PNL
 
Posts: 2716
Joined: Sat Mar 14, 2009 1:18 am
Location: phx az

1973 Chevrolet Vega Kammback GT

Re: Lower Control Arm Bushing Ferrules

Postby cosvega76 » Thu Apr 08, 2010 8:49 am

Maybe I'm rushing things, but I will admit I am underwhelmed by the response to this thread. I was under the impression in previous discussions that these parts were coveted and in demand. If there is little interest in these I cannot, in good conscience, go back to the manufacturer and ask that they invest in them just to let them sit on the shelf.

Chuck
cosvega76
 
Posts: 2739
Joined: Mon Jul 03, 2006 8:36 am
Location: Moscow Mills, MO

1973 Chevrolet Vega GT

Re: Lower Control Arm Bushing Ferrules

Postby monzajer » Thu Apr 08, 2010 9:19 am

Ya know, I think there is a thread on here where Clyde made some of these. Sorry, can't remember the thread title.

I am sure Clyde will chime in here soon. He keeps up on all these threads. Hey Clyde, remember this?

Be patient, Chuck, more peeps will speak up.

PM sent.

cheers jer :mrgreen:
monzajer
 
Posts: 1140
Joined: Thu Jul 13, 2006 10:29 pm
Location: Omaha, Ne

1977 Chevrolet Monza Sport Hatchback

Re: Lower Control Arm Bushing Ferrules

Postby gerbsinmd » Thu Apr 08, 2010 9:34 am

I'm in for 8!!!
1999 Saturn SL2
2017 Cruze Hatchback
2008 Town & Country - Family transport
2018 Cruze - 35mpg - avg, 49.7mpg - best so far.
2011 Impala - commuter
RIP-2002 Saturn SL2 Commuter car - burned a valve @ 234k miles

1977 Monza Mirage being Restified!!
User avatar
gerbsinmd
 
Posts: 2062
Joined: Mon Jun 26, 2006 2:48 pm
Location: Dunkirk, MD

1977 Chevrolet Monza Mirage

Re: Lower Control Arm Bushing Ferrules

Postby cjbiagi » Thu Apr 08, 2010 9:53 am

Yes, I did make a couple but the time it took was not going to pay off. I found the correct size washer and bushing but it had to be drilled, cut, welded and ground smooth because of the tight clearances. Personally, if I needed new bushings I would gladly pay the $8 or whatever for them. However, I replaced all of mine when I rebuilt my suspension and have another NOS set that I am keeping so I am good. I also looked into having a machinist make some but I ran into the same situation as Chuck and I dropped it. Yeah, $70 or $80 may seem like a lot of money, especially if you aren't planning on rebuilding your suspension real soon but people with these cars need to think ahead if you plan on keping your H body for any length of time. Even common replacemnet parts are being dropped by many suppliers so you need to start creating a "stash" of parts for future use. I was a bit surprised too by the lack of interest on Chuck's efforts. By the way, there are bushings on ebay that show the washers included, they are not. I already checked so beware.
Last edited by cjbiagi on Thu Apr 08, 2010 10:30 am, edited 4 times in total.
Clyde.........75 Monza 2+2
User avatar
cjbiagi
 
Posts: 8608
Joined: Sun Jun 25, 2006 2:37 pm
Location: Glenwood, Illinois

1975 Chevrolet Monza

Re: Lower Control Arm Bushing Ferrules

Postby monzajer » Thu Apr 08, 2010 9:56 am

Clyde's right, put me down for 8.

thanks

cheers jer :mrgreen:
monzajer
 
Posts: 1140
Joined: Thu Jul 13, 2006 10:29 pm
Location: Omaha, Ne

1977 Chevrolet Monza Sport Hatchback

Re: Lower Control Arm Bushing Ferrules

Postby monza355 » Thu Apr 08, 2010 12:20 pm

Do you really need to put these back in? I could not get the control arm to go back in with these in place so I left them out. Did I screw up?
monza355
 
Posts: 133
Joined: Thu Nov 05, 2009 1:35 pm

Re: Lower Control Arm Bushing Ferrules

Postby cosvega76 » Thu Apr 08, 2010 12:28 pm

I would be concerned about two things with the ferrules missing: the control arm may not hold the alignment setting as well, and there may be a possibility of bushing damage in extended use.

Chuck
cosvega76
 
Posts: 2739
Joined: Mon Jul 03, 2006 8:36 am
Location: Moscow Mills, MO

1973 Chevrolet Vega GT

Re: Lower Control Arm Bushing Ferrules

Postby cjbiagi » Thu Apr 08, 2010 1:01 pm

The hole in the frame is oval to allow the cam bolt to be adjusted. You need the ferrules to make sure that you have enough contact surface between the inner sleeve and the frame. The other thing is that the hole in the bushing is larger than the cam bolt, so there is going to be a lot of play between the bolt and the metal sleeve inside the bushing. The cam bolt is designed to fit inside the ferrules and the ferrules fit inside the inner sleeve of the bushing. So, yes, you definetly need them.
Clyde.........75 Monza 2+2
User avatar
cjbiagi
 
Posts: 8608
Joined: Sun Jun 25, 2006 2:37 pm
Location: Glenwood, Illinois

1975 Chevrolet Monza

Re: Lower Control Arm Bushing Ferrules

Postby monza355 » Thu Apr 08, 2010 4:55 pm

CRAP! :bang:
monza355
 
Posts: 133
Joined: Thu Nov 05, 2009 1:35 pm

Re: Lower Control Arm Bushing Ferrules

Postby rocketride » Thu Apr 08, 2010 6:15 pm

monza355 wrote:CRAP! :bang:


X2

When I pulled my front end apart I think there were only two plane washers used on one lower arm. When I got my new bushings from A-zone there weren't any in the boxes. Oh well, I need to take it apart again and put the rubber insulators that I forgot about back on the front springs anyway. :bang: If I can scrape up the money I'm in.

Jon
He who dies with the most toys.......is still dead.
User avatar
rocketride
 
Posts: 1550
Joined: Sun Oct 29, 2006 10:56 am
Location: Duncan, Oklahoma

1980 Oldsmobile Starfire SX

Re: Lower Control Arm Bushing Ferrules

Postby 73astregt » Thu Apr 08, 2010 10:49 pm

if the ferrules become available id be interested in a set for my stash. :th:
73 astre gt 355 small block 435 hp 435 torque edelbrock performer rpm power package
User avatar
73astregt
 
Posts: 2227
Joined: Sun Aug 12, 2007 4:50 pm
Location: Bridgewater Nova Scotia Canada

1973 Pontiac Astre GT

Re: Lower Control Arm Bushing Ferrules

Postby cosvega76 » Mon Apr 12, 2010 9:58 am

I am going to report back to Rare Parts this week. I will admit, I was still hoping for a better response, both here and on the Cosworth board. At this point, I can't honestly ask them to make an investment in these parts with such low interest. If you have any more comments, please let me know by Wednesday. I'm not trying to push, just would like to respond while the issue is fresh in everyone's minds.

Chuck
cosvega76
 
Posts: 2739
Joined: Mon Jul 03, 2006 8:36 am
Location: Moscow Mills, MO

1973 Chevrolet Vega GT

Next

Return to Suspension, Steering, & Brakes Tech

Who is online

Users browsing this forum: No registered users and 3 guests

cron