moser no longer redrilling monza rotors

[wrightway]

I sent my monza rotors to moser to have redrilled to 5x4.5 bolt pattern.
they sent them back and said they cannot do it.
I know of 2 sets that i have personaly seen done by moser
and seen many online that have been done by them.
They gave me two different answers as to why one was 1 stud will hit the support vane and the other was the inside diameter is to small and the studs will hit
both the answers are bs as every set i have seen done had the same issues.
I can only guess that they have had a liability issue

[cjbiagi]

Did you request press in studs? I know those won't work but they did do my rotors with screw in studs.

[wrightway]

Did you request press in studs? I know those won't work but they did do my rotors with screw in studs.

Nope i asked for 3"x1/2 x20screw in studs.

[wrightway]

Did you request press in studs? I know those won't work but they did do my rotors with screw in studs.

Did yours have the four vanes on the inside diameter?

[cjbiagi]

I think all Monza rotors have the vanes. The ones they did for me have them. One of the studs just barely cut into one vane.

[Fastmax32168]

Any competent automotive machine shop can re-drill those rotors. I had mine done locally.
Roy

[73 307 GT]

Sorry to resurrect an old thread, but did you ever get your rotors done? I have Monza rotors on my '73 GT and was thinking of having them redrilled as opposed to doing the S-10 swap. Haven't approached my local machine shop yet.