Steering Hits Oil Pan...

Moderator: Moderators

Steering Hits Oil Pan...

Postby Teal23t » Sat Sep 20, 2014 7:48 pm

Hi ..New to the board.Just bought a 71 Vega 350 motor looks to be a stock pan and steering seems to resting on bottom of pan and grease fitting will also hit if turned to far.Has a home made motor front plate to hold motor in.no motor mounts.Seems like a age old problem. What oil pan could i use to solve the problem.
Thanks Bob
Teal23t
 
Posts: 5
Joined: Sat Sep 20, 2014 8:09 am


Re: Steering Hits Oil Pan...

Postby chevyart » Sat Sep 20, 2014 8:43 pm

miledon makes a nice setup. you need their pickup for your oil pump. you could also make your own. some of the guys have the specs posted. no matter which pan you use, it will be close if you mount the motor in the right place. its sort of limited as to how far up you can raise the engine and keep it level (or close to level) welcome to the jungle of v-8 vegas. art
chevyart
 
Posts: 1849
Joined: Fri Oct 27, 2006 10:00 pm

Re: Steering Hits Oil Pan...

Postby CaptainPainn » Sat Sep 20, 2014 10:33 pm

As far as the grease zerk goes, you can take it out and put it a bolt, or take a hammer and put a dent in the oil pan.
1976 GMC Sprint (Daily Driver)
1976 Vega hatchback
1977 Vega Kammback (Main Project)
1979 Skyhawk
1985 K10 long bed (Daily Driver)
User avatar
CaptainPainn
 
Posts: 264
Joined: Wed May 01, 2013 11:48 am
Location: Three Rivers Michigan

1977 Chevrolet Vega

Re: Steering Hits Oil Pan...

Postby Monza Harry » Sun Sep 21, 2014 12:24 am

Moog inners (ES681N) have the Zert in a more favourable position, the bottom, that is another option. Oil Pan Mod's are here under "Oil System mods" Click H-Body FAQ on the left (upper-ish) http://www.v8monza.com/
I'm not a hoarder I'm a preservationist 78 Monza Spyder (Soon To Be 2+2 with Spoilers)
User avatar
Monza Harry
 
Posts: 2183
Joined: Tue Oct 04, 2011 8:50 am
Location: Windsor ON Canada

1978 Chevrolet Monza 2+2

Re: Steering Hits Oil Pan...

Postby Teal23t » Sun Sep 21, 2014 6:52 am

Ok Thanks Guys...I guess i am here to collect as much info as i can then see which way i will go.Keep the post going.You guys have been there done that.
Thanks Bob
Teal23t
 
Posts: 5
Joined: Sat Sep 20, 2014 8:09 am

Re: Steering Hits Oil Pan...

Postby dadhad1 » Sun Sep 21, 2014 7:43 am

Hi Bob. Another few things in this... Last I looked (2 years ago) they only make these pans for a 2 piece rear main block. If you have a newer 1 piece rear main you might have trouble finding one. If someone here on the forum knows of a 1 piece rear main pan they could chime in. The mod is pretty easy though. I did the pan mod outlined on the v8monza site with a 1 piece rear main pan. You can buy a little more clearance by changing out those 2 grease fittings to set screws and just pop grease fittings in to re-shoot.

If you have clearance on the top side you could raise the motor a bit with new/modified plates. Just keep the drive line angle in check if you do.

Mike
--------------------------------------------------------------------------------------
'What is it? A Maverick? No. A Pinto? No. Looks like a mini Camaro. A Camaro? No. A Chevette? HAHA, No. It's a Vega. Ahhhhh, cool man.'

My Vega Photo Gallery at World of Wheels in Boston 2014
https://get.google.com/albumarchive/115 ... pAWBWhqw1V
YouTube Video Playlist of My V8 Vega Resto Mod
https://www.youtube.com/watch?v=F1EZdPJ ... ELLLJsPs6C
User avatar
dadhad1
 
Posts: 415
Joined: Tue Jun 11, 2013 2:20 pm
Location: Bedford, NH

Re: Steering Hits Oil Pan...

Postby Smiley » Sun Sep 21, 2014 7:29 pm

Kevco makes a Vega pans for both one and two piece rear main seal motors
User avatar
Smiley
 
Posts: 676
Joined: Tue Jul 17, 2012 2:50 am

Re: Steering Hits Oil Pan...

Postby paranoid56 » Sun Oct 19, 2014 11:21 pm

kinda hard to see, but i just installed my 350 with kevco pan and mine is hitting the steering parts also. :(

Image
paranoid56
 
Posts: 80
Joined: Sat Jul 13, 2013 11:47 pm

Re: Steering Hits Oil Pan...

Postby MonzaRacer » Wed Feb 08, 2017 1:49 am

MonzaRacer
 
Posts: 165
Joined: Mon Oct 30, 2006 8:38 am
Location: Burns City Indiana

Re: Steering Hits Oil Pan...

Postby b_pappy » Fri Feb 10, 2017 1:05 pm

I'm using the Kevco pan and Don Hardy mounts. Had to modify the pan, as instructed by Kevco, and it was still was too close, so had to modify my Don Hardy mounts too to raise the engine a 1/4". Like someone said, welcome to the jungle of V8 Vega's.
Bruce
b_pappy
 
Posts: 184
Joined: Mon Nov 17, 2014 9:30 pm


Return to Suspension, Steering, & Brakes Tech

Who is online

Users browsing this forum: No registered users and 1 guest