what master cylinder and Brake Proportioning Valve

Moderator: Moderators

what master cylinder and Brake Proportioning Valve

Postby dcatv » Thu Jan 01, 2015 9:58 pm

what master cylinder and brake proportioning valve, is everybody using with s10 front brakes and ford 9" rear disc brakes, thanks in advance
dcatv
 
Posts: 8
Joined: Sun Nov 16, 2014 10:13 pm


Re: what master cylinder and Brake Proportioning Valve

Postby BadBowtie » Thu Jan 01, 2015 10:58 pm

I'm running the same setup with manual brakes and have had pretty good results with 78 camaro manual master, pedal is a bit stiff but it works for me. Someone might chime in for power assisted. I just use a SBC proportioning valve on the rear line and set my own distribution.
James

1975 Vega GT 350 sbc, STR10 crossram w/dual 390CFM Holleys, M21 4-speed, Hurst shifter and ford 9"
User avatar
BadBowtie
 
Posts: 809
Joined: Wed Oct 28, 2009 12:20 am

1975 Chevrolet Vega GT

Re: what master cylinder and Brake Proportioning Valve

Postby cosvega76 » Fri Jan 02, 2015 8:06 am

dcatv wrote:what master cylinder and brake proportioning valve, is everybody using with s10 front brakes and ford 9" rear disc brakes, thanks in advance


What vehicle are these 'Ford 9" rear disc brakes' from (what diameter caliper piston)?

Chuck
cosvega76
 
Posts: 2468
Joined: Mon Jul 03, 2006 8:36 am
Location: Moscow Mills, MO

1973 Chevrolet Vega GT

Re: what master cylinder and Brake Proportioning Valve

Postby dcatv » Fri Jan 02, 2015 9:41 pm

i am going to be running manual brakes, not power, the rear brake setup is off a Lincoln
dcatv
 
Posts: 8
Joined: Sun Nov 16, 2014 10:13 pm


Return to Suspension, Steering, & Brakes Tech

Who is online

Users browsing this forum: No registered users and 1 guest