Page 1 of 1

what master cylinder and Brake Proportioning Valve

PostPosted: Thu Jan 01, 2015 9:58 pm
by dcatv
what master cylinder and brake proportioning valve, is everybody using with s10 front brakes and ford 9" rear disc brakes, thanks in advance

Re: what master cylinder and Brake Proportioning Valve

PostPosted: Thu Jan 01, 2015 10:58 pm
by BadBowtie
I'm running the same setup with manual brakes and have had pretty good results with 78 camaro manual master, pedal is a bit stiff but it works for me. Someone might chime in for power assisted. I just use a SBC proportioning valve on the rear line and set my own distribution.

Re: what master cylinder and Brake Proportioning Valve

PostPosted: Fri Jan 02, 2015 8:06 am
by cosvega76
dcatv wrote:what master cylinder and brake proportioning valve, is everybody using with s10 front brakes and ford 9" rear disc brakes, thanks in advance


What vehicle are these 'Ford 9" rear disc brakes' from (what diameter caliper piston)?

Chuck

Re: what master cylinder and Brake Proportioning Valve

PostPosted: Fri Jan 02, 2015 9:41 pm
by dcatv
i am going to be running manual brakes, not power, the rear brake setup is off a Lincoln