by kdsupervega » Fri Jul 10, 2015 4:53 pm
Hi guys & gals, I'm a new member, i just did a s10 swap on my vega, i bought s10 spindles so i thought! Now my tie rods are hitting my 15'' rims. What i bought was g-body spindles, i went on bob gumm 's web site an read his articles on the swap, the casting numbers are 459756 &459755, bob says the g-body spindles are 1'' longer than the vega's. So i thought that was the problem, so i measure the vega's spindle from the center of ball joint to center of tie rod , an it was 6 1/4'' the s10 spindles are 1/2'' longer, so i measure the g- body spindle an got 6 3/4'', so i don't know what's going on! I'm stuck big time, an don't where to turn! I been reading you'lls web site for a while now, an never heard of this problem before. Please help. kdsupervega Thanks for any help.