The Official H-Body Internet Community

Hey guys, Has anyone used the front upper and lower control arms for the vega? I am thinking about using them but just wanted to know if I can use my tie rod ends,or what I need to use, aje use s-10 ball joints for upper and lower,i called there techs and they had no clue any help or advice greatly appreciated,ty Brody

yes, I am using their upper and lower control arms in front. Quality is great, and they fit with minor modification. I am using S-10 ball joints, spindles, etc. Tie rod ends should be fine.
Bruce

does their a arms fit the Monza too?

thanks
ken

TurboKen, yes

Ty Bruce.

I have had a complete set of AJE uppers and lowers on my street car monza for 10 years and couldn't be happier with them. Solved all of the alignment issues with the S10 swap and offers great consistent handling, something not easy to achieve on a H body. Jegs still sells them new and I just found a complete set currently listed on ebay here at a great price:

http://www.ebay.com/itm/Monza-Vega-AJE- ... D8&vxp=mtr

I couldn't find them on JEGS site. Up to $344 now on ebay.

Brian I sometimes find it easier to find with their "Search By Brand" functions some of those are Huge so a "Search Within Results" narrows that down a little: http://www.jegs.com/p/AJE-Suspension/AJ ... 2/10002/-1 http://www.jegs.com/v/AJE-Suspension/04 ... d=-1&No=20 Harry

Thanks Harry, I tried the "Shop by Vehicle" on several H bodies with AJE Suspension; Control Arm. I guess it never made the connection

I just purchase uppers and lowers on Jeg's three weeks ago . Not cheap ! Free shipping though .

gasketman wrote: Free shipping though .

I see you are a "Glass Half Full" guy Eh Gasketman! That sure is some "Rosie Glasses outlook" Thanx for the chuckle Harry

Hey monzaforme , What spindles did you use ? My post is on here somewhere . I got the AJE arms and a spindle and rotor kit from Southwest but my camber is way out . Used S10 and mid eighties spindles per Bob Gumm's site .