vega differetial rebuild

Moderator: Moderators

vega differetial rebuild

Postby wecoden » Mon May 23, 2016 1:59 pm

Vega differential ring and pinion rebuild I need any advice on how to do it right.
wecoden
 
Posts: 3
Joined: Thu Jul 26, 2012 1:34 pm


Re: vega differetial rebuild

Postby cjbiagi » Mon May 23, 2016 3:20 pm

How far down to you plan on tearing it down? Are you replacing or changing the rearend gears? It should be basically the same as other GM 10 bolts, it does require some understanding on how to set the gear pattern and backlash as well as the proper amount of crush sleeve torque to set the bearing preload. Best advice i would have is to read up and study as many articles as you can until you feel you have a good knowledge. Here are some but you can google GM 10 bolt rearend rebuild.

http://knowhow.napaonline.com/how-to-re ... ferential/
http://www.hotrod.com/how-to/chassis-su ... y-rebuild/
https://www.youtube.com/watch?v=cj_5J3fqucE
https://www.youtube.com/watch?v=7KN50p3qDrA
Clyde.........75 Monza 2+2
User avatar
cjbiagi
 
Posts: 7937
Joined: Sun Jun 25, 2006 2:37 pm
Location: Glenwood, Illinois

1975 Chevrolet Monza

Re: vega differetial rebuild

Postby 283vega » Tue May 24, 2016 7:19 am

What engine is in front of that rear? Is it the 6.5 vega rear and you have a v8 dont bother .Find a 7.5 monza rear or s10 rear and go from there.
283 vega
70 corvette


Brian
User avatar
283vega
 
Posts: 582
Joined: Sun May 11, 2008 1:36 pm


Return to Suspension, Steering, & Brakes Tech

Who is online

Users browsing this forum: No registered users and 1 guest