Re: Coil spring installation
Posted: Thu Jul 28, 2016 11:47 am
im a little confused from the various posts..the flat cut end of spring goes into the upper control arm and the angled cut end of spring goes into lower control arm end, and is lined up in place by rotating the cut end against a nail or other round object inserted into the small hole on bottom of control arm . is this correct. i think you can make a visual check of correct postiioning of spring by looking at cut end in a slot at bottom of lower control arm. is that right.? also i thought that all h-bodies have the springs positioned this way. is that correct. thanks art