by cjbiagi » Mon Oct 31, 2016 8:59 am
When I had mine redrilled by Moser Engineering ( I am told they are not doing these any more) I used 1/2" screw in studs and one of them is right along the edge of one of the ribs. It does not go directly through it, but rather right along the side. The threads may cut into it slightly. On another one they cut the stud flush with the surface and drilled one of the studs through part of the existing stud. This is the only way the pattern ( 5 x 4 1/2") lines up. I am happy to say they have been working perfectly.
You do not have the required permissions to view the files attached to this post.
Clyde.........75 Monza 2+2