TurboKen wrote:ok so I just looked at my install, when I was looking at the angle of the aje lower arms upward travel, it looked like the better position for the QA1 shock was to be mounted on the spindle side of the a arm which is where I mounted it, I noticed your shock is mounted on the opposite side of the a arm mount, do you think if you switched positions it might help? maybe you have some binding on that lower mount hth
Ken
I am running a lot of caster so i needed to mount my shocks on the inside of that bar to keep the springs from hitting the side of the coil spring housing. However
my suspension definitely bottomed out the shocks on a road trip I believe.
Like I said hopefully its ok I have driven it pretty hard with the new smaller bolts and beefier mount and no failure....yet