1975 cosworth vega rear brakes

Moderator: Moderators

1975 cosworth vega rear brakes

Postby vegajohncosworth » Wed Dec 27, 2017 6:48 pm

hey folks. i would like to know if anyone has successfully adapted larger drum brakes onto their '75 cosworth vega rear axle? if so, what did you do for this swap? i am interested in unbolting the entire existing brake assy. backing plate and all, replace with updated stuff. '76-up h body? thanks.
vegajohncosworth
 
Posts: 9
Joined: Thu Dec 21, 2017 12:54 am


Re: 1975 cosworth vega rear brakes

Postby cjbiagi » Wed Dec 27, 2017 10:40 pm

I did this decades ago on my 75 Monza which had the same small rear Vega brakes. As I recall, it was a bolt on affair if you get the later H body rear backing plate and everything else. The only issue was the center pilot hole on the later H body drums is slightly smaller than the pilot on the rear axle. So I had to file or grind a little material off the center hole on the drum to allow it to slide over the axle. No big deal.......
Clyde.........75 Monza 2+2
User avatar
cjbiagi
 
Posts: 8194
Joined: Sun Jun 25, 2006 2:37 pm
Location: Glenwood, Illinois

1975 Chevrolet Monza

Re: 1975 cosworth vega rear brakes

Postby TimMcCabe » Thu Dec 28, 2017 1:26 pm

I did the big brake swap on my 75 Cosworth.
Rather then grind the drum center larger, I put a washer on each stud behind the drum to space it out from the flange a little bit.
Worked OK for me.

Cheers,
Tim
1972 TPI Vega T56 6 speed

Contact me for all of your Tachometer needs
User avatar
TimMcCabe
 
Posts: 256
Joined: Thu Jun 29, 2006 1:45 pm
Location: Toronto Canada


Return to Suspension, Steering, & Brakes Tech

Who is online

Users browsing this forum: No registered users and 1 guest