PS Pump Brackets Alternative - MerCruiser

Moderator: Moderators

PS Pump Brackets Alternative - MerCruiser

Postby Mark in INdiana » Sun Feb 18, 2018 4:27 pm

In searching for Monza V8 PS pump and brackets, I came across a set up on MerCruiser boat PS pump set up that maybe a viable alternative. I ended up with both set ups so here is a comparison using the same Monza pump/pulley. Tips: if you’re going after the MerCruiser, get the entire pump, brackets, spacers, washers and double ended pump mounting stud. It will save a bunch of time rounding it all up. I bought just the bracket set on eBay and had to go to an online marine site to figure it out and get them. Then, the 3/8” longer double ended stud came from Classic Industries for a Pontiac. I’m in the parts gathering stage right now, don’t have SBC but here are some pics comparing the set ups. I hope this helps......
Attachments
7328271B-BAC0-4F04-B8FE-76462603BE9C.jpeg
The lower MerCruiser bracket hole is for an alternator
7328271B-BAC0-4F04-B8FE-76462603BE9C.jpeg (151.44 KiB) Viewed 232 times
E2AC1666-A151-433E-9DF2-9B66B7595077.jpeg
E2AC1666-A151-433E-9DF2-9B66B7595077.jpeg (98.07 KiB) Viewed 232 times
FA4DC2D4-70AD-4B78-A3C2-FB0B2764F7D4.jpeg
FA4DC2D4-70AD-4B78-A3C2-FB0B2764F7D4.jpeg (118.12 KiB) Viewed 232 times
7891AA9D-79BA-4113-8D26-F788AA97C1ED.jpeg
MerCruiser installation
7891AA9D-79BA-4113-8D26-F788AA97C1ED.jpeg (134.25 KiB) Viewed 232 times
51268398-E586-4E1F-B1FC-DC2A25BA3116.jpeg
Monza double ended stud
51268398-E586-4E1F-B1FC-DC2A25BA3116.jpeg (37.31 KiB) Viewed 232 times
Mark in INdiana
 
Posts: 15
Joined: Thu Mar 24, 2016 12:24 pm
Location: South Bend, IN


Return to Suspension, Steering, & Brakes Tech

Who is online

Users browsing this forum: No registered users and 1 guest