I'm hoping you guys can help me with some brake system components sizing information.
I have a 76 Vega (Cosworth) that will eventually be a non-tubed, street bruiser with a healthy 383/5 speed/Moser 12 bolt and brake system from a v6 1998-2005 S10 pickup. For now though, I just want to convert the existing 7.5 rear to 1983-92 S10 2WD 5 lug axles and drum brakes. So far so good. For the front 5 lug conversion, can I use the later 98-05 S10 spindles/rotors/calipers with the earlier S10 rear drum brakes and with the existing 76 Vega master cylinder? Or should I just use the 1983-92 S10 2WD front set up also for the initial 5 lug conversion? Here are some component size questions I've not found in my searching that will really help answering these questions;
76 Vega (Cosworth);
1) What is the front rotor diameter and caliper piston diameter?
2) What is the rear drum brake diameter/width and wheel cylinder size?
3) What is the master cylinder bore size?
1983-92 S10 2WD pickup rear drum brakes;
1) What is the drum brake diameter/width and wheel cylinder size?
1998-2005 S10 2WD pickup;
1) What is the front rotor diameter and caliper piston diameter?
2) What is the rear drum brake diameter/width and wheel cylinder size?
3) What is the master cylinder bore size?
I really appreciate your help! Thank you very much!
Mark in INdiana