moulding clips

Tips, tricks, tools...

Moderator: Moderators

moulding clips

Postby monzacoupe » Mon May 30, 2011 2:31 pm

Looking for the moulding clips that hold the metal trim that is above the door(i.e. what you would bang your head on when entering the car). I've found a few that work for Cutlasses and Caprices by they don't look quite right. Any ideas?

Rick
User avatar
monzacoupe
 
Posts: 457
Joined: Tue Dec 09, 2008 1:34 pm
Location: Saskatoon, Canada

1980 Chevrolet Monza Coupe


Re: moulding clips

Postby my79monza » Mon May 30, 2011 10:47 pm

I had Clyde find me a couple of clips for my 80 coupe and he had a hard time finding them, finally only getting me two of them.
Still haven't tried to put the trim pieces back on as I might have to remove the back seat trim to work on the opera windows when I redo the vinyl top.
I could use a couple of spares myself.
will scrounge around and see if I can find the part numbers.
Merle
Last edited by my79monza on Tue May 31, 2011 10:20 am, edited 1 time in total.
User avatar
my79monza
 
Posts: 820
Joined: Sat Jul 18, 2009 10:34 pm
Location: Washington, Iowa

Re: moulding clips

Postby monzacoupe » Mon May 30, 2011 11:30 pm

Part number I was given by a GM dealer here is 20007308 but there was no picture or diagram to confirm that it was a match. I've found no exact match on the net, some close but a little too wide. Very frustrating! Would using the remaining clips(one each side) along with gluing them in place be strong enough?

Rick

P.S. Go Canucks!
User avatar
monzacoupe
 
Posts: 457
Joined: Tue Dec 09, 2008 1:34 pm
Location: Saskatoon, Canada

1980 Chevrolet Monza Coupe

Re: moulding clips

Postby monzaaddict » Tue May 31, 2011 2:07 am

monzaaddict
 
Posts: 2599
Joined: Sun Jul 02, 2006 3:04 pm

Re: moulding clips

Postby monzacoupe » Tue May 31, 2011 10:00 am

Thanks Addict! great site!

Rick
User avatar
monzacoupe
 
Posts: 457
Joined: Tue Dec 09, 2008 1:34 pm
Location: Saskatoon, Canada

1980 Chevrolet Monza Coupe

Re: moulding clips

Postby my79monza » Tue May 31, 2011 10:24 am

Looks like # 3 to me is what I used.
Merle
User avatar
my79monza
 
Posts: 820
Joined: Sat Jul 18, 2009 10:34 pm
Location: Washington, Iowa

Re: moulding clips

Postby monzacoupe » Wed Jun 01, 2011 6:26 pm

79monza PM sent.

Rick
User avatar
monzacoupe
 
Posts: 457
Joined: Tue Dec 09, 2008 1:34 pm
Location: Saskatoon, Canada

1980 Chevrolet Monza Coupe


Return to Restoration Tips

Who is online

Users browsing this forum: No registered users and 4 guests