interior plastic repaint

Tips, tricks, tools...

Moderator: Moderators

interior plastic repaint

Postby monzacoupe » Sat Jun 11, 2011 12:40 am

I just finished repainting my interior plastic, I think it turned out quite nice for a first time try. For anyone as dumb as me, I would highly recommend marking or labeling or even putting the screws back in their holes so you won't have to try to remember where they go two weeks later. :bang:

I cleaned all the pieces, sanded all the rough and brittle places, then cleaned again. I used a couple of coats of
SEM Vinyl Prep prior to painting. I painted with off the shelf SEM Color Coat, mostly for the price difference, they could have color matched a couple of cans for about $95, I spent about $15 per can. The color isn't an exact match but close enough for me.

Next step... tune up!

Rick


P.S. Go Canucks!!!
Attachments
interior before.jpg
before
interior before.jpg (90.21 KiB) Viewed 1726 times
passenger side.jpg
before
passenger side.jpg (65.33 KiB) Viewed 1726 times
189.jpg
side by side comparison
189.jpg (90.79 KiB) Viewed 1726 times
interior after.jpg
after
interior after.jpg (98.93 KiB) Viewed 1726 times
passenger after.jpg
after
passenger after.jpg (95.25 KiB) Viewed 1726 times
User avatar
monzacoupe
 
Posts: 403
Joined: Tue Dec 09, 2008 1:34 pm
Location: Saskatoon, Canada

1980 Chevrolet Monza Coupe


Re: interior plastic repaint

Postby ROB » Sat Jun 11, 2011 12:43 am

Looks like it turned out great.

Rob
1976 Cosworth Vega, #2825
I'm not a purist, this is gonna have a V8.
User avatar
ROB
 
Posts: 585
Joined: Thu Dec 10, 2009 8:20 pm
Location: Goodyear , AZ

1976 Chevrolet Vega Cosworth

Re: interior plastic repaint

Postby res0o7eb » Sat Jun 11, 2011 2:11 am

Good work. Looks like a good color match to me - better than that faded blue.
User avatar
res0o7eb
 
Posts: 3776
Joined: Wed Jun 28, 2006 10:53 pm
Location: Near Seattle, WA

1977 Pontiac Sunbird Hatchback

Re: interior plastic repaint

Postby sirrick4 » Sat Jun 11, 2011 5:11 am

looks pretty good to me.
Rick ......1975 Monza 2+2
sirrick4
 
Posts: 271
Joined: Sun Mar 13, 2011 6:32 am
Location: Gympie, Queensland Australia

Re: interior plastic repaint

Postby Vegavulture » Sat Jun 11, 2011 3:12 pm

it turned out really well, wasn't sure what to do with those plastic pieces, now i do.
1977 Pontiac Astre Safari V6
1978 Pontiac Sunbird Formula V8
1975 Vega NB (parts)
1977 Buick Skyhawk HB (parts)
1980 Monza TC (parts)
1980 Sunbird HB (parts)
User avatar
Vegavulture
 
Posts: 171
Joined: Thu May 19, 2011 3:15 pm
Location: Vancouver, B.C.

1977 Pontiac Astre Safari Wagon

Re: interior plastic repaint

Postby NVEGAR8D » Sun Jun 12, 2011 1:05 am

Hi,
i'll be doing the same to my interior too.
nick75vega
User avatar
NVEGAR8D
 
Posts: 682
Joined: Thu Oct 21, 2010 12:20 am
Location: Orangeville/On, Canada

1975 Chevrolet Vega Hatchback

Re: interior plastic repaint

Postby cosworth0135 » Fri Dec 16, 2011 11:22 pm

guys i used satin finish Fusion from krylon with excellent results but mine went from red to black one thing i made sure to buy enough to do the whole job in the same batch, but still had really good results the satin isn't "too" shiny and lots better than flat 5 bucks a can beats 15, follow instructions on can,I usually wash real good with soap and water and rub down with brake cleaner to remove oil from fingers then shoot.Timmy
i currently drive a geo metro,insert silly joke here,, but i'll pass you while your getting gas
If you don't have time/money to do it right the first time,how will you have time/money to do it again. Timmy
User avatar
cosworth0135
 
Posts: 850
Joined: Tue Jul 14, 2009 11:36 pm

Re: interior plastic repaint

Postby csigler94 » Wed May 08, 2013 7:43 am

Hey guys, I found another trick. I used Mighty sealer in one even coat, then applied Krylon Fusion and quess what? All the pieces now pass the scratch test. I'll put up some pics when I get them all installed.
User avatar
csigler94
 
Posts: 29
Joined: Fri Dec 02, 2011 8:44 am
Location: west salem Ohio

1980 Pontiac Sunbird

Re: interior plastic repaint

Postby fyrftr50 » Wed Dec 07, 2016 9:11 am

I also did the same, repainted all my interior stuff, vinyl pieces and the plastic. Used vinyl paint from Canadian Tire and a Tremclad (or Canadian equivalent, I think it was) for the interior. I went black so no matching was necessary. The biggest thing to be aware of is to prep. Some plastic pieces I didn't do as well on at the beginning and the paint peeled right off immediately. Some of the more damaged, sun dried plastic would possibly not pass a significant scratch test though, but I don't touch it so it has held up well after 15 years now. After this long though, the vinyl is starting to lose its gloss and could stand to have a repaint, but it still looks pretty good, just not as shiny. It has been 15 years so no complaints.
Bryan
fyrftr422@hotmail.com

12 Dodge Ram 1500 SLT
12 Chevrolet Cruze LT/RS
00 Jayco Eagle 12SO
80 Chevy Monza Spyder
79 Buick Road Hawk

The ROAD HAWK ... http://roadhawk.homestead.com/roadhawk.html

MONZA, SKYHAWK, STARFIRE & SUNBIRD ... http://monza.homestead.com/monza.html
User avatar
fyrftr50
 
Posts: 2325
Joined: Tue May 23, 2006 2:36 pm
Location: Brighton, ON, Canada

1980 Chevrolet Monza Spyder

Re: interior plastic repaint

Postby SOLSAKS » Wed Dec 07, 2016 10:41 am

S.E.M. is a fine product.

you did a great job.

keep up the good work.

i took mine out and it was 5 years before re-installing

and after 5 yrs the little trim peices on end of package tray

puzzled me as to where they went....but then it all came together.

dave in NC
SOLSAKS
 
Posts: 160
Joined: Sun Sep 18, 2011 3:04 pm

Re: interior plastic repaint

Postby zzip » Wed Dec 14, 2016 2:02 pm

Looks good Rick, thx for explanation and pics .
1988 Monza L4 2.5L
1989 Monza Spyder L4 2.5L
1990 Monza Spyder V6 3.2L
1991 Monza Spyder V6 3.8L
2013 Monza V6 3.8L
2014 Starfire V6 3.8L
User avatar
zzip
 
Posts: 306
Joined: Thu Oct 24, 2013 11:52 am
Location: Belgium

1980 Chevrolet Monza 2+2

Re: interior plastic repaint

Postby RedFiveKBS » Thu Dec 15, 2016 10:35 am

I have also used the SEM product. If you follow their directions, clean, use the adhesion promoter, etc. it does a fantastic job.

I restored my dash pad with the SEM Firethorn. I put down five light coats but it looks like brand new.
dash8a.jpg
Dash restoration
dash8a.jpg (105.1 KiB) Viewed 255 times
dash5.jpg
Dash pad
dash5.jpg (116.5 KiB) Viewed 255 times


Also swapped in some vented kick panels too. Cleaned and painted them just like the dash.
kick.jpg
Kick panel
kick.jpg (89.52 KiB) Viewed 255 times


Great product.
User avatar
RedFiveKBS
 
Posts: 388
Joined: Fri Jan 08, 2016 8:01 pm
Location: Elyria, OH

1980 Pontiac Sunbird Formula

Re: interior plastic repaint

Postby monzacoupe » Thu Dec 15, 2016 8:49 pm

Great Job!!
User avatar
monzacoupe
 
Posts: 403
Joined: Tue Dec 09, 2008 1:34 pm
Location: Saskatoon, Canada

1980 Chevrolet Monza Coupe

Re: interior plastic repaint

Postby leander » Wed Feb 08, 2017 3:29 am

Looks good. I'm planning to paint some interior prices in my car this weekend and will definitely use SEM product.
leander
 
Posts: 13
Joined: Mon Jan 16, 2017 3:30 am


Return to Restoration Tips

Who is online

Users browsing this forum: No registered users and 1 guest