by Monza Harry » Sat Jun 27, 2015 6:35 pm
Rick I have to admit that I don't know what material that header panel/facia is made of. Is that a hard one (fiberglass/SMS) or flexible (urethane)? I have never even looked close at one of those, I am ashamed of my lack of H-Body knowledge base in this area, my interest was V8Vega, until the hatchback Monza (Spyder nose for the easiest description) was revelled back in late '74 I always thought of those as "Old Man Cars (says the old man). I would think a trip to the wreckers should produce some suitable material if it is urethane, and Canadian Tire for fiberglass you could create a mould out of just about any material you can work with, some paneling out of the neighbours basement Reno' cut to shape cover edge with electrical tape spray with some "Pledge" or "Pam" apply goop, wait for it to go green (semi hard, not fully cured) and pry off, leave some cloth exposed for attachment to the other side and F'glass it on. That other solution I posted is for the flexible noses only, it states clearly "no fiberglass/SMS" This will never be good as new but our options are limited so do the best you/we can. Keep us posted. Harry
I'm not a hoarder I'm a preservationist 78 Monza Spyder (~Soon(ish +/- I guess) To Be 2+2 with Spoilers)