look to see the 11.5x15x26 in stock wheel wells,In Action

Moderator: Moderators

look to see the 11.5x15x26 in stock wheel wells,In Action

Postby 2lucke4u » Mon Oct 30, 2006 12:33 am

Heres the picture I promised,"Its in my garage",its actually a picture of a picture,the first sliding run with the mt streets,the front was up just before we went hard right, then left, then shut it down,the sidewall on the tire reads 11.5x15x26,these are on 8 inch summit wheels with a 4 inch backspacing,I have about 7/16 on the inside,the never hit the wells when i fishtailed off the line and corrected,,the section width is the same as a 9x15x26 hoosier slick,the tread measured an honest 10 inches but did not handle the hp of the car,the track was cold and the temp was 50,
Charles
80 monza coupe,black,355,.488 lift cam,performer intake.B&M th350,tci 2200 stall,3.42 posi,street car,
74 GTO 350 4bbl,3sp,3.08 posi,buccaneer red
68 Firebird 400, 4sp,3.08 posi,black
User avatar
2lucke4u
 
Posts: 539
Joined: Mon Jul 17, 2006 8:16 pm
Location: Cassville WI

1978 Chevrolet Monza Coupe


Postby ColinOpseth » Mon Oct 30, 2006 12:39 am

hey, nice ride..

It looks like it launches really hard :)
You do not have the required permissions to view the files attached to this post.
User avatar
ColinOpseth
 
Posts: 2887
Joined: Mon May 22, 2006 9:33 pm
Location: Victorville, CA

1972 Chevrolet Vega GT

Postby 2lucke4u » Mon Oct 30, 2006 3:42 am

Colin
Thanks for moving the picture and the compliment,one day i'll figure out these computer things,,
Charles
80 monza coupe,black,355,.488 lift cam,performer intake.B&M th350,tci 2200 stall,3.42 posi,street car,
74 GTO 350 4bbl,3sp,3.08 posi,buccaneer red
68 Firebird 400, 4sp,3.08 posi,black
User avatar
2lucke4u
 
Posts: 539
Joined: Mon Jul 17, 2006 8:16 pm
Location: Cassville WI

1978 Chevrolet Monza Coupe

Postby bill1978v8 » Mon Oct 30, 2006 8:41 pm

looks nice, sorry to hear they didn't hook. What PSI did you run?

Bill
1975 Monza 2+2, 4.3L V8, Auto
User avatar
bill1978v8
 
Posts: 1657
Joined: Sun Jun 25, 2006 2:44 pm
Location: Ambridge PA

1978 Chevrolet Monza 2+2

Postby 2lucke4u » Mon Oct 30, 2006 11:24 pm

Ran 13.5 psi,I put them on ebay this evening,I will replace with 10 inch hoosiers or et drags,,
Come on spring,,
Charles
80 monza coupe,black,355,.488 lift cam,performer intake.B&M th350,tci 2200 stall,3.42 posi,street car,
74 GTO 350 4bbl,3sp,3.08 posi,buccaneer red
68 Firebird 400, 4sp,3.08 posi,black
User avatar
2lucke4u
 
Posts: 539
Joined: Mon Jul 17, 2006 8:16 pm
Location: Cassville WI

1978 Chevrolet Monza Coupe


Return to Drag Racing

Who is online

Users browsing this forum: No registered users and 12 guests

cron