The Official H-Body Internet Community

Hi im new at this im building a 1973 vega wagon i starder building this wagon about a year and half and its not finish i cant wait to take it to the track, my question is how fast do you think it will run in the 1/8 the motor is a 406 or 409, 400 block size 40 flat pistons 6 inch rod 400 crankshaf, crower cam 600 lift, Dart iron eagle platinum heads 215cc intake runners, 72cc chamber, Victor jr intake, 850 holley, msd ignition, stock vega converter 350 tranny whit Bnm transpack, the delay of the car is the rear the chasis lader bars rear frame kits and aluminum ajustable coil over, chevy 12 bolts 5.13 rear end and hoosier 29.5x11.5x15 slicks no bottle only motor.

so can you guys help me out more or less how will it run in the 1/8 mile

thanks

Sounds pretty cool, The motor sounds pretty close to the same as mine. I would say the car should go into the 6's somewhere around 100mph. But whats up with the stock vega converter. I havnt heard of anyone doing that in a while. You should really looking into getting a decent converter that somewhat matches what you want to do. Oh and I see your are from San Diego, where are you gonna plan on running it im from san diego also.

rustorbust thanks for you post I have that converter because thats what im starting up whit i plan on changing to a something whit a transbrake maybe 4000 stall some around that and i race in www.autodromotijuana.com tijuana mexico

Sounds good, your should bring it up to qualcomm or barona sometime

qualcomm sucks!

ok