Need an estimate on what this setup would run

Moderator: Moderators

Need an estimate on what this setup would run

Postby TheyCallMeDave » Fri Jun 18, 2010 12:32 pm

Ok, i think ive found a great street/strip 1972 Vega . Im very curious to know what it would run at the strip since the owner hasnt ran it at the strip. Its a 388 bored Stroker engine, 10-1 c.r. , .588 lift, crane roller cam (lopey) , with 750 edelbrock carb , edelbrock 208 alum. Heads with matching single plane intake . Has 350 built Auto Trans (auto shift or manual shift) 3800 stall . 9" Ford rear with 411 gear . Has new Drag radials on the back with skinnys on the front.

Can an experienced Racer give me some idea what the ET would be for the 1/8 and 1/4 mile ? Thanks.
TheyCallMeDave
 
Posts: 7
Joined: Thu Jun 17, 2010 9:08 pm


Re: Need an estimate on what this setup would run

Postby TheyCallMeDave » Fri Jun 18, 2010 12:34 pm

Also, what would be the estimate weight of the car ? Thanks.
TheyCallMeDave
 
Posts: 7
Joined: Thu Jun 17, 2010 9:08 pm

Re: Need an estimate on what this setup would run

Postby chevy art » Wed Jun 23, 2010 11:22 pm

im guessing high 11s or real low 12s car sounds like it should run alot faster than what i said but those tires are really going to hold you back(no traction like yoiu need for your car. we shall see good luck art
chevy art
 
Posts: 1124
Joined: Fri Feb 26, 2010 11:33 pm


Return to Drag Racing

Who is online

Users browsing this forum: No registered users and 4 guests

cron