Made a couple passes @ test and tune

Moderator: Moderators

Re: Made a couple passes @ test and tune

Postby Greybeard » Thu Jul 07, 2016 6:27 am

2:10 am
Woke this time thinking about making changes. Too many parts, too many options. This mornings project seems to be intake manifolds. I had a Smokeyram. I gave it to a friend that had always done stuff for me without asking for anything but the friendship. If I had it still, it would be on it. I run hot and cold on the STR-10. It's in great shape, been installed but never seen fluids.
image.jpeg
image.jpeg (112.42 KiB) Viewed 88 times

I've also got this Barry Grant Aeroram. Like the STR, it is a crossram with removable top. I was thinking low rise tunnelram.
image.jpeg
image.jpeg (109.12 KiB) Viewed 88 times

My thoughts are to install it with the dual quad top, but turn the carbs around backwards so the fuel lines are on the passenger side. Too messy having to find away around. Wonder what tech would say about those fuel lines?
image.jpeg
image.jpeg (91.02 KiB) Viewed 88 times

Well after 3:00 now, not sleepy. Alarm goes off in less than two hours. My cat wants attention. Coffee anyone?
1937 Chev 2dr sedan
1966 Chevy El Camino (daily driver w/300K miles)
1966 Chevy V8 Corvair https://greybeard.shutterfly.com
1972 Vega GT
1985 Corvette
1999 Safari Sahara 30' with Cat 330
1999 Jeep Cherokee 'toad'
Next: 1964 289 slabside Cobra, LS525 power
User avatar
Greybeard
 
Posts: 78
Joined: Mon Dec 08, 2014 4:48 am
Location: Sequim, Washington


Re: Made a couple passes @ test and tune

Postby chevyart » Fri Jul 08, 2016 2:53 pm

hey grey beard. you are missing all the fun if you dont crawl under the car all the time.not sure if i remember the specs on you motor, but just knowing that you have a hydraulic roller that should definitely go to 6500 rpm's, your best results would probably be with a edelbrock rpm air gap intake with a good 750 cfm carb. cant see a need for a bigger carb, unless mayber if you had a 383 or 406 cu in. then, maybe up to 800 cfm's. id would definitely stay away from multiple carbs, as they may look cool, but wont give you great power increases unless you have a race setup and operate in the 7500 rpm and higher range, all the time. i guess air bags(2 of them) work to help traction, but using 1, probably on passenger side rear can lead to a little problem on top end. for every action there is a reaction. preloading the right rear unloads the front drivers side suspension, and at the end of the run, when you let off, the front end on drivers can just unload back down, and maybe send your car off course. just a little tidbit of knowledge i picked up from racers who i think know the ins and outs of suspensions. if you tune with shocks, they get you going and then unload right away and get you down the track without any events at end of the quarter mile. let us know how you do next time out. art
chevyart
 
Posts: 1839
Joined: Fri Oct 27, 2006 10:00 pm

Re: Made a couple passes @ test and tune

Postby 6D9 » Sat Jul 09, 2016 10:36 am

Nice you got to get it out for some shakedown passes! The 109 trap speed shows the potential of the car. I would put a set of 235/60/15 MT drag radials on it and go back again to practice. The tires should help a ton and allow you to run the car out safely. Keep us posted.
72 Vega GT...406 sbc..TH700R4...3.42 gear...235/60/15 MT DR's....11.54 at 118.6..Dad's car
72 Vega GT...4cyl..4 speed..all stock
6D9
 
Posts: 184
Joined: Tue Sep 30, 2014 12:48 am

Previous

Return to Drag Racing

Who is online

Users browsing this forum: No registered users and 1 guest