The Official H-Body Internet Community

Vega, Monza, Sunbird, Astre, Starfire, Skyhawk

Skip to content

World Products Single Plain Motown Manifold

Moderator: Moderators

Post a reply

Postby Quarter Flash » Wed Jul 05, 2006 2:03 pm

More pics
You do not have the required permissions to view the files attached to this post.
1980 Monza drag car in progress. Started with a shell no floor. Jeg's chassis kit, power glide, 406 engine, and Olds\Pontiac rear. Have progress pics if you ask.
Quarter Flash
 
Posts: 12
Joined: Wed Jun 28, 2006 6:20 pm
Location: Merlin, Oregon
Top

Postby ColinOpseth » Wed Jul 05, 2006 2:11 pm

Holy smokes.
User avatar
ColinOpseth
 
Posts: 2887
Joined: Mon May 22, 2006 9:33 pm
Location: Victorville, CA

1972 Chevrolet Vega GT
Top

Postby DoozCoop » Wed Jul 05, 2006 11:57 pm

No kiddin - I'm droolin' about DDBBC's motor....
I can't drive 55!
User avatar
DoozCoop
 
Posts: 48
Joined: Tue Jun 27, 2006 12:55 am
Location: Oneida, N.Y.

1974 Chevrolet Vega Kammback GT
Top

Re: World Products Single Plain Motown Manifold

Postby SWT Racing » Thu Jul 06, 2006 12:42 am

Quarter Flash wrote:Has anyone seen a dyno test on this manifold? How does it do with a 406 size engine? I bought an engine with this manifold on it. I have a 4600 stall, glide, 600 lift, 255 duration, solid roller, Dart Pro 1 215, 10 to 1 compression. Car will weigh 2600 to 2700 lbs. My thinking is the manifold will not pull on top well enough to get me to 6500. With my stall I need upper end performance. I have not been able to find any real comparrison information on this manifold

Bob


That manifold should be more than enough for 6500 rpm, even if they leave the ports extra small like a SBC Victor Jr. to leave room for porting.
Andrew Slater
Hangar18 Fabrication/SWT Racing
http://www.hangar18fabrication.com/swtracing.html

TurboGMs.com Featured Car: Click Here!
User avatar
SWT Racing
 
Posts: 79
Joined: Sat Jul 01, 2006 12:34 pm
Location: Lake Wylie, SC

1972 Chevrolet Vega GT
Top

Motown Manifold

Postby Quarter Flash » Mon Jul 10, 2006 9:55 am

Thanks for all your response! I bought this manifold from another racer unused. Neither of us had ever run one or seen one run. His engine came with it. He chose to go with a Super Victor. :?:

Bob
1980 Monza drag car in progress. Started with a shell no floor. Jeg's chassis kit, power glide, 406 engine, and Olds\Pontiac rear. Have progress pics if you ask.
Quarter Flash
 
Posts: 12
Joined: Wed Jun 28, 2006 6:20 pm
Location: Merlin, Oregon
Top

Postby DDBBCVEGA » Thu Jul 13, 2006 2:18 pm

just another engine shot no reason just bored getting over four root canals
Image
User avatar
DDBBCVEGA
 
Posts: 97
Joined: Thu Jun 29, 2006 6:33 pm
Location: houston

1971 Chevrolet Vega
Top

DDBBCVEGA-DAVE

Postby mldeolde » Thu Jul 13, 2006 11:52 pm

IS THAT A STEFS VACCUME PUMP ? looks a lot like mine. and i know what in the heck are you doing running a pump on a street car? THE PUMP WAS BRAND NEW ON E-BAY AND THE PRICE WAS RIGHT .COULDN'T RESIST THE CHEAP HORSE POWER !!!!!!!!!!! :roll:
User avatar
mldeolde
 
Posts: 1718
Joined: Mon Jun 26, 2006 4:21 pm
Location: Riverside,California

1975 Chevrolet Monza IMSA
Top

Postby DDBBCVEGA » Fri Jul 14, 2006 4:28 pm

its a aerospace pump hey like you said its cheap hp and keeps your plugs alot cleaner
User avatar
DDBBCVEGA
 
Posts: 97
Joined: Thu Jun 29, 2006 6:33 pm
Location: houston

1971 Chevrolet Vega
Top

new intake

Postby DDBBCVEGA » Fri Aug 11, 2006 2:20 pm

the new intake is coming along need bout two more days then its on to the runners
Image
Image
Image
User avatar
DDBBCVEGA
 
Posts: 97
Joined: Thu Jun 29, 2006 6:33 pm
Location: houston

1971 Chevrolet Vega
Top
Previous
Post a reply

Return to Drag Racing

Who is online

Users browsing this forum: No registered users and 7 guests