'78 231 V6 2-Jet Air Cleaner Vacuum Line Routing

Moderator: Moderators

'78 231 V6 2-Jet Air Cleaner Vacuum Line Routing

Postby mikebrow74 » Thu Nov 30, 2017 10:50 pm

I'd like to verify the vacuum hose routing for this thermal valve/switch located in the air cleaner base of my 1978 231. It is currently connected to the a vacuum port at the pass side rear of the carb base, then to this thermal valve in the air cleaner, then to the Secondary Vacuum Break Diaphragm on the pass side of the carb. Is this correct routing? This is different from the Thermostatic Air Cleaner vacuum circuit. This pic is a similar switch, mine has just two ports.
Attachments
Air Cleaner Valve.gif
Air Cleaner Valve.gif (61.3 KiB) Viewed 30 times
mikebrow74
 
Posts: 24
Joined: Fri Aug 04, 2017 11:06 pm
Location: Elk Grove, CA


Return to Carb/Intake/EFI Induction Tech

Who is online

Users browsing this forum: No registered users and 1 guest