Holley vs Rochester

Moderator: Moderators

Holley vs Rochester

Postby rgsuperstrat » Wed Oct 25, 2006 7:45 pm

If a four banger originally came with the passenger side Rochester, can the holley that came on the drivers side be fit to this application. The deal is, peterpan has a carb that I might purchase, but it is from the driver side mount. The one I have is passenger side, and its a Rochester. Will it work?? Thank you in advance.
Posts: 30
Joined: Wed Sep 13, 2006 1:05 am
Location: Boise ID

1980 Chevrolet Monza Spyder

Postby ColinOpseth » Wed Oct 25, 2006 8:56 pm

I'd be curious to see if the carb linkage would still work as it would now be on the opposite side. That's my just only thought about that, though as all of my engines are EFI :)

'72 Vega with '93 Camaro LT1/M29 T56/12 bolt 3.31. 16" IROCs all around. Sanderson headers into duals with an H-pipe and Flowmasters. It's loud but at least it's faster than your grandma's Buick. pwned.
User avatar
Posts: 2886
Joined: Mon May 22, 2006 9:33 pm
Location: Victorville, CA

1972 Chevrolet Vega GT

Return to Carb/Intake/EFI Induction Tech

Who is online

Users browsing this forum: No registered users and 1 guest