by JimW » Wed May 18, 2011 6:34 pm
Clyde,
When you say the stock V8 pump has worked, is that the stock H-body pump? Is that pump in the tank? If yes, then where can I get one or what year/model can i look one up for?
I would really like to keep the in tank setup, BUT, only if it works.
Rick,
A TBI pump? A TBI pump is an in tank pump, correct? Are there any that will work with a stock tank? If it isn't in the tank, then I would greatly appreciate some more details.
I'm still open to all suggestions.
Engine 327 .0030 over
6.25 Crower rods
KB pistons
balanced and blueprinted
1.6 roller rockers Comp Cam
mild cam .500 109 LSA
1.94 heads, stock 68 CC, ported and polished with 'Z28' springs
compression just under 11:1
650 DP Holley and Holley intake
Sanderson headers
Expect to be used as a street cruiser and tire burner, but hopefully will get to the track at least a couple of times a year
'64 Buick Wildcat w/401 Nailhead in restoration process
'67 Chevy C20 (son's daily driver)w/Inline 250 - lumps, big valves, Offy intake, Holley carb, Langdon Headers, 240 hp w/ T5
'77 Astre SBC 327 with TPI, Megasquirt EMS, 200-4R