Moderator: Moderators
chevyart wrote:take float bowls off, and turn upside down and the bottom of the float bowl should be level(parallel with bottom of float bowl. if it isnt, adjust it with the adjust nut on needle and seat. this should get you very close to being right on, and then check with motor running and gas should just be trickling out bottom of sight plug hole. do this with car on level ground.. i have even done this with the motor off, by just rocking car slightly and the gas will overflow slightly out bottom of sight plug hole. if it does this, you are close to being right on. art
Return to Carb/Intake/EFI Induction Tech
Users browsing this forum: No registered users and 13 guests