Cosworth Webers

Moderator: Moderators

Cosworth Webers

Postby dindin » Wed Oct 07, 2015 9:56 am

I have just installed webers on my Cosworth with reindexed sprockets, it starts and runs but I get popping comming from intakes and some backfiring also, it seem to be very lean (pulled plugs and they are very clean white), I tried to adjust the mixture out but the popping is still around especially when choke is off and engine warmed)..

Does it usually need different jets with the reindexed sprockets, from what I read it makes for a leaner running engine to begin with,

Any help appreciated


Al
dindin
 
Posts: 410
Joined: Wed May 21, 2014 10:01 am


Re: Cosworth Webers

Postby hammerdown7 » Wed Oct 07, 2015 7:22 pm

Is your engine stock other than the Webers? What size are they and what chokes do they have? Here's a good set-up guide, http://cnx.org/contents/a0a6da11-6437-4 ... -of-Weber-

It sounds like you are running too lean.

Dick
User avatar
hammerdown7
 
Posts: 3328
Joined: Mon Jun 26, 2006 7:53 pm
Location: Clawson, MI

1976 Chevrolet Vega Cosworth

Re: Cosworth Webers

Postby dindin » Thu Oct 08, 2015 9:52 am

Yes it stock, they are 40's from hutton, but I figured it out..the mixture screws were in way to much..

still needs minor tweeking but runs really good now no more popping.

Al
dindin
 
Posts: 410
Joined: Wed May 21, 2014 10:01 am


Return to Carb/Intake/EFI Induction Tech

Who is online

Users browsing this forum: No registered users and 1 guest