Page 1 of 1

Cosworth Webers

PostPosted: Wed Oct 07, 2015 9:56 am
by dindin
I have just installed webers on my Cosworth with reindexed sprockets, it starts and runs but I get popping comming from intakes and some backfiring also, it seem to be very lean (pulled plugs and they are very clean white), I tried to adjust the mixture out but the popping is still around especially when choke is off and engine warmed)..

Does it usually need different jets with the reindexed sprockets, from what I read it makes for a leaner running engine to begin with,

Any help appreciated


Re: Cosworth Webers

PostPosted: Wed Oct 07, 2015 7:22 pm
by hammerdown7
Is your engine stock other than the Webers? What size are they and what chokes do they have? Here's a good set-up guide, ... -of-Weber-

It sounds like you are running too lean.


Re: Cosworth Webers

PostPosted: Thu Oct 08, 2015 9:52 am
by dindin
Yes it stock, they are 40's from hutton, but I figured it out..the mixture screws were in way to much..

still needs minor tweeking but runs really good now no more popping.