Page 1 of 1

'78 231 V6 2-Jet Air Cleaner Vacuum Line Routing

PostPosted: Thu Nov 30, 2017 10:50 pm
by mikebrow74
I'd like to verify the vacuum hose routing for this thermal valve/switch located in the air cleaner base of my 1978 231. It is currently connected to the a vacuum port at the pass side rear of the carb base, then to this thermal valve in the air cleaner, then to the Secondary Vacuum Break Diaphragm on the pass side of the carb. Is this correct routing? This is different from the Thermostatic Air Cleaner vacuum circuit. This pic is a similar switch, mine has just two ports.