Removal of door windows?

[Boostedballs]

I'm having a bit of trouble removing the windows from the doors. It looks like I need a special tool for the hardware on the front corner of the window where a bearing attaches though the window. The rest of it looks like the window might be glued to the bottom track? I am going with Lexan windows but I don't want to break the glass ones.

Anyone looking for a pair of windows with mechanisms?

[AusRs]

the window comes out with that bearing still on the glass ,notice the cutout in the top of te door ,that bearing comes through there ,its a bit of stuffing around to get it out though

[gerbsinmd]

I agree with AusRs, in fact I had to spread the top of the door a bit to make it come out.

[AusRs]

funny though when it came time to refit the glass ..................they just dropped straight in no struggle at all ........go figure

[Boostedballs]

So does the window tracks come out at the same time?

[monzajer]

boostedballs, if you are refering to the track at the bottom of the window(the track the window is "glued"into) then yes it will also come out at the same time. There is an idler track attached to the inner door skin. Removing the idler track will allow the window to move freely and you can move it as needed to remove the regulator rollers from the track and then up and out.

jer