Door hinges and end play

Moderator: Moderators

Re: Door hinges and end play

Postby cjbiagi » Mon Feb 22, 2010 8:52 pm

The factory pins have little "ears" on them to prevent them from coming out once installed. If you can see them you need to try and squeeze them while tapping the pin out. Often they just get mangled and once that happens you just have to pound them out. I just sold my last set of GM pins and bushings but I do believe I can locate some more if needed. Let me know if I can help..........
Clyde.........75 Monza 2+2
User avatar
Posts: 8079
Joined: Sun Jun 25, 2006 2:37 pm
Location: Glenwood, Illinois

1975 Chevrolet Monza

Re: Door hinges and end play

Postby gt350fme » Wed Mar 22, 2017 2:36 pm

Wow fast forward 7 years and I am finally finishing my doors and thought I would share what I found to really tighten up my loose door hinges.
Firstly the door hinge ears that are welded to the body where the door pins go through where worn and loose fitting, I used a hardened sharp center punch to raise the metal around the inside of the pin holes kneurling and raising the inner surface then carefully reaming the hole to fit the new pins, one could also weld up the pin holes and redrill.

Secondly I found the new door hinge bushings that come with new door pin sets to be somewhat loose fitting, I found better fitting bushings from part # FF-520-5

And lastly some new door pins from part # TAI-GMHK35 fits vega-monza 71-80 picture below but I used the FF-520-5 bushings instead.

The end result where doors with no end play at all!
IMG_0147.JPG (20.03 KiB) Viewed 191 times
1964 Chevy K20 Panel
1973 GT Vega Hatchback
1984 944 porsche
1992 Lexus SC 400
User avatar
Posts: 573
Joined: Wed Jul 05, 2006 9:40 pm

1973 Chevrolet Vega GT


Return to Bodywork and Accident Repair

Who is online

Users browsing this forum: No registered users and 1 guest