Coil springs installation idea..

Best technical articles on the forums. Send nominations to the admins. You can reply to topics but only admins can make new ones.

Moderator: Moderators

Coil springs installation idea..

Postby marco_1978_spyder » Thu Mar 14, 2013 9:10 am

by megavega » Thu Mar 14, 2013 1:47 am

they take the spring and put it in a hyd press, it has like a cup on each end, they compress the spring a few inchs down, then they use metal banding material and place 2 bands on each spring. It is placed about 1-2 coils from the ends , so after you cut them you can remove them otherwise the top and bottom coils will pinch the banding.. This shortens up the springs a few inchs and they will drop right in. You just place the springs ends to the recess in the control arm and upper spring mount and then bolt up your balljoints. Then just take a pair of tin snips and cut the bands, remove banding. Super simple and like I said it only takes about 5 mins a side to do.

next time call your local spring shop, like truck and trailer springs,etc. thats who does it for me.
1978 Monza Spyder V8 4speed, posi
1978 Sunbird Formula V6, 5 Speed, Hatchback
1978 Sunbird notchback 4cyl Auto
2006 Chevrolet Aveo 5 speed Hatchback
Yes, you can refer to me as Mark
Please visit my blog... http://chevymonza.blogspot.com/ Follow if you like!
Featuring special guests; Carl Beraytor and Ray D'atore

My Red spyder now has a youtube channel please Like and Subscribe!!!
https://www.youtube.com/channel/UCOzzSR ... ISuing7KLA
User avatar
marco_1978_spyder
Senior Moderator
 
Posts: 5247
Joined: Sun Jun 25, 2006 5:20 pm
Location: Western, New YorK / Rochester


Re: Coil springs installation idea..

Postby H-Parts » Mon Jul 18, 2016 11:21 pm

HOLY COW !

That is a FANTASTIC Trick !
H-Parts
 
Posts: 19
Joined: Fri Jul 01, 2016 8:52 am

Re: Coil springs installation idea..

Postby nutt » Tue Jul 19, 2016 9:06 am

You still have to be careful, as the spring is spiral wound and the straps could still shift under load and release the spring. I've tried something similar but needed to attach vise grips so the strap wouldn't shift.
nutt
 
Posts: 215
Joined: Fri Aug 23, 2013 1:52 am
Location: Portland Oregon

Re: Coil springs installation idea..

Postby CaptainPainn » Tue Jul 19, 2016 4:06 pm

I've done the same thing with a compressor and a bit of chain. Slightly more work but it doesn't cost anything.
User avatar
CaptainPainn
 
Posts: 264
Joined: Wed May 01, 2013 11:48 am
Location: Three Rivers Michigan

1977 Chevrolet Vega


Return to Best Of

Who is online

Users browsing this forum: No registered users and 1 guest

     
cron