Page 1 of 1

powerbyace ls headers,motor mounts

PostPosted: Tue Jul 14, 2015 10:42 pm
by chenz1
Has anyone used powerbyace ls headers,motor mounts.If so were you satisfied with them..??

Re: powerbyace ls headers,motor mounts

PostPosted: Thu Nov 05, 2015 2:38 pm
by 9secCosworth
Sorry for a late response...Yes I just purchased the LSx Headers PERFECT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :th:

Re: powerbyace ls headers,motor mounts

PostPosted: Thu Nov 05, 2015 3:27 pm
by Smiley
Can you post pics of them installed ?

Re: powerbyace ls headers,motor mounts

PostPosted: Thu Nov 05, 2015 11:00 pm
by monzaaddict
Yes, please post pictures. Did you use his mounts and pan kit?

Re: powerbyace ls headers,motor mounts

PostPosted: Sun Dec 27, 2015 7:37 pm
by brody2855
I used the p.b.ace motor mounts and I used sanderson shorties headers and no problems as of yet,all went together fine.

Re: powerbyace ls headers,motor mounts

PostPosted: Tue Feb 02, 2016 6:08 pm
by chenz1
can you please post pics of lsx headers and p.b.ace motor mounts and sanderson shorties headers installed

Re: powerbyace ls headers,motor mounts

PostPosted: Tue Feb 23, 2016 2:40 am
by chenz1
9secCosworth did you install headers yet

Re: powerbyace ls headers,motor mounts

PostPosted: Fri May 13, 2016 8:41 am
by day2vega
chenz1 wrote:Has anyone used powerbyace ls headers,motor mounts.If so were you satisfied with them..??



I used the motor mounts, only to mockup my motor in a way of location while trying to figure out my location for my front motor mount install...

Honesty I thought they were kinda flimsy and thin...Really wasn't impressed at all, if I had to use them I would not feel confident with the mounts...just my opinion, which probably means nothing...

Re: powerbyace ls headers,motor mounts

PostPosted: Tue Jul 26, 2016 9:08 am
by 9secCosworth
Smiley wrote:Can you post pics of them installed ?



Sorry for not posting sooner, hope the pics are helpful.

Re: powerbyace ls headers,motor mounts

PostPosted: Tue Jul 26, 2016 11:12 am
by monzaaddict
Did you use the powerbyace oil pan, transmission crossmember? Did you buy the side mounts and then decide to use the front plate instead?
pics of the pan please.
Can you post pics of the clearance on the drivers side between engine and firewall,
clearance between header and steering box coupler.
Will the stock hood clear with an air cleaner?

Re: powerbyace ls headers,motor mounts

PostPosted: Wed Jul 27, 2016 12:09 pm
by 9secCosworth
monzaaddict wrote:Did you use the powerbyace oil pan, transmission crossmember? Did you buy the side mounts and then decide to use the front plate instead?
pics of the pan please.
Can you post pics of the clearance on the drivers side between engine and firewall,
clearance between header and steering box coupler.
Will the stock hood clear with an air cleaner?


I didn't buy the motor mounts, decided to use a plate instead, for me it was easier since i had the material. I Altered the stock pan, later I discovered Holley has a pan that works too, they call it a "retro fit" pan, the other GM pans DO NOT CLEAR!!!!!! I'll get better pics this weekend, but here are a few more I have now... An air cleaner won't fit :(

Re: powerbyace ls headers,motor mounts

PostPosted: Sat Jan 07, 2017 12:03 pm
by 6D9
9secCosworth wrote:
monzaaddict wrote:Did you use the powerbyace oil pan, transmission crossmember? Did you buy the side mounts and then decide to use the front plate instead?
pics of the pan please.
Can you post pics of the clearance on the drivers side between engine and firewall,
clearance between header and steering box coupler.
Will the stock hood clear with an air cleaner?


I didn't buy the motor mounts, decided to use a plate instead, for me it was easier since i had the material. I Altered the stock pan, later I discovered Holley has a pan that works too, they call it a "retro fit" pan, the other GM pans DO NOT CLEAR!!!!!! I'll get better pics this weekend, but here are a few more I have now... An air cleaner won't fit :(


Thanks for the pics! I was chatting with ya on your youtube vids a few days ago. What type of air filter did you try and fit? Looks like a nice drop base filter would work. I have one from Allstar Performance has a nice 1.75" drop top it. Any pics of the clearance from the headers to the ground/body? Thanks