Page 1 of 1

Can anyone tell me what brand headers?

PostPosted: Mon Jan 08, 2018 9:15 pm
by gm_fan
I have a set of headers which came with a Starfire I bought and they have no id numbers or tags on them. Can anyone tell by looking what they are? The collectors come out on a 45 degree angle..Never seen any like them. The mounts , which I still have , that came with the car are front mounts. It looks like side mounts may work with these , but not sure..thanks Mark

Re: Can anyone tell me what brand headers?

PostPosted: Mon Jan 08, 2018 10:42 pm
by Smiley
Don Hardy

Re: Can anyone tell me what brand headers?

PostPosted: Mon Jan 08, 2018 11:05 pm
by gm_fan
will they fit a Monza as well as a Vega? thanks Mark

Re: Can anyone tell me what brand headers?

PostPosted: Tue Jan 09, 2018 7:02 pm
by b_pappy
I was going to say those look like my Don Hardy headers. They work with their side mount, and I assume they would work with a front motor plate. They exit towards the side for side pipes. We cut mine back some and routed them under the car. You can see a pic in my journal of the routing.
Bruce

Re: Can anyone tell me what brand headers?

PostPosted: Tue Jan 09, 2018 10:26 pm
by monzaaddict
bob gumm says he used them with stock side mounts.
http://v8monza.com/
go to faq
then v8 exhaust

Re: Can anyone tell me what brand headers?

PostPosted: Tue Jan 09, 2018 10:40 pm
by gm_fan
Thanks for the information. l thought they looked like they might work with the side mounts.Only problem is the side mounts I have are welded solid, which does not thrill me very much..One thing I noticed about these headers is where they bolt up to the head, they look taller which would be a good thing using the fast burn gm heads that have the D-port exhaust..thanks again,,Mark

Re: Can anyone tell me what brand headers?

PostPosted: Wed Jan 10, 2018 1:05 am
by Smiley
V8monza.com and powerbyace.com offer 2 different types of Monza V8 mount replacements if you want some that are not solid.
Image

Image

Image