The Official H-Body Internet Community

by **bbcowboy** » Mon Mar 02, 2015 10:58 am

Now that the body is pretty much completed and its time for the engine compartment to get some loving care..

by **ponchonuty** » Tue Mar 03, 2015 12:05 am

Dang!!! Man this a kool build! Great work!!

by **bbcowboy** » Tue Mar 03, 2015 10:51 am

Thank you...it's been a long process but it's coming together..

by **mahoy78spyder** » Wed Mar 04, 2015 2:56 pm

Byron do you have the firewall reinforced where the 3 brake master cylinders go by chance? (something stitch welded on the inside perhaps?) The metal looks quite a bit thicker at that location.

by **bbcowboy** » Wed Mar 04, 2015 3:04 pm

Yes there is a metal plate behind the firewall....
There is duct tape covering the three holes in the photo..

by **mahoy78spyder** » Wed Mar 04, 2015 3:21 pm

Ok... my eyes didn't deceive after all. Good call on reinforcing that area. :th:

by **bbcowboy** » Wed Mar 04, 2015 3:31 pm

No yours eyes didn't deceive you....Thank you..Wilwood just came out with a product that would hold their 3 master cylinders...to late for me to use that item....

by **NixVegaGT** » Mon Mar 09, 2015 10:45 am

That's got to be an older pic. It's missing the clearance for the throttle... Or is that little bump on the pic of the engine bay for something else? I discovered I'm going to have to modify the Corvette drive-by-wire pedal so it doesn't interfere with the steering column on mine. It' goes the other way!

by **bbcowboy** » Mon Mar 09, 2015 11:00 am

That is an old picture...the pedals are close together..

by **bbcowboy** » Wed Apr 01, 2015 10:31 am

Well, I gave up on the engine compartment this weekend....I jump in and modified the custom hood with heat extractors....

by **zzip** » Wed Apr 01, 2015 2:23 pm

Great hood man :th:

Peter from Antwerp

by **Kenova** » Wed Apr 01, 2015 3:21 pm

What are the vents from?

Ken

by **mahoy78spyder** » Wed Apr 01, 2015 3:32 pm

Seriously impressed with that hood and the look! Great job.

by **bbcowboy** » Wed Apr 01, 2015 4:12 pm

The vents are from an 2014-2015 Ford Mustang GT.
I still need to finish off the underneath side of the hood.....trying to blend it all in....

Thank you guys....

by **avewhtboy** » Wed Apr 01, 2015 9:23 pm

hey man the car is coming along really nice love the hood vents great idea

The Official H-Body Internet Community

IMSA Vega

Re: IMSA Vega

Re: IMSA Vega

Re: IMSA Vega

Re: IMSA Vega

Re: IMSA Vega

Re: IMSA Vega

Re: IMSA Vega

Re: IMSA Vega

Re: IMSA Vega

Re: IMSA Vega

Re: IMSA Vega

Re: IMSA Vega

Re: IMSA Vega

Re: IMSA Vega

Re: IMSA Vega

Who is online