Re: zeke's Monza
Posted: Tue Feb 09, 2016 2:23 pm
Great work again Chris .
Grtz
Peter
Grtz
Peter
Vega, Monza, Sunbird, Astre, Starfire, Skyhawk
https://forums.h-body.org/
dindin wrote:Wow thats pretty awesome work there, all you have let is to pray for drizzle..
Al
zeke wrote:Thanx Al and I had noticed the ironic nature of adding delay wipers to a sunny day car. It was very good exercise for my brain.
Sam wrote:Hello Chris:
When you select new cylinder heads, be aware of a few points so that you won't need to change headers:
Avoid D-Port
Avoid Angle Plug
Avoid Vortec (and this includes aftermarket cylinder heads utilize Vortec spark plug locations.
The Vortec cylinder have different plug spacing, and many aftermarket manufacturers do not tell you this in their product description. So, here is the easy way to tell. Standard small block cylinder heads have plug spacing (distance between the two CENTER spark plugs) of 4.5". On cylinder heads using Vortec spacing, that distance is only 4.0".
zeke wrote:I mentioned that the L05 heads will be upgraded someday.Sam wrote:Hello Chris:
When you select new cylinder heads, be aware of a few points so that you won't need to change headers:
Avoid D-Port
Avoid Angle Plug
Avoid Vortec (and this includes aftermarket cylinder heads utilize Vortec spark plug locations.
The Vortec cylinder have different plug spacing, and many aftermarket manufacturers do not tell you this in their product description. So, here is the easy way to tell. Standard small block cylinder heads have plug spacing (distance between the two CENTER spark plugs) of 4.5". On cylinder heads using Vortec spacing, that distance is only 4.0".
More good info from Sanderson!
Ordered CC13-SEC through Summit because they handle everything at the border and it's easier/cheaper.